Bearings Stuck!

[Scooternewb]

Does anyone know how to get Bones Reds bearings out of a metalcore(i have a yak scat). I dont know how to get em out. Theyre really stuck.

 

[Zaηe]

SEARCH.
first post let off, go search. gogogogogogogogogo.

 

[THOMAS G (GLAZEY)]

they're really easy for me just put a 5mm allen key inside the wheel, make sure it touches the back of the bearing and pull on it really hard and they should come easy

 

[jackscoots777]

you can also buy mutts bearing remover tool. ive got one, there a little overpriced(typical skaterhq) but they workm like a charm. hope this helps

 

[matr!]

wait until you get a real wheel and then see if mutts can get the bearings out...

 

[Mikey G]

If you have a spacer in it, move the spacer to the side, so an axle can not pass through. Put the axle into the first bearing, but then being stopped by the spacer. Hit it with a mallet until bearing falls out. Then for the other bearing, take the same axle, place it on the inner ring then hit the axle with a mallet until bearing falls out.

If you do not have a spacer in it, take a bolt one size smaller then an axle and place it on the inner ring of the bearing aiming through the other bearing. Hit the bolt with a hammer until the bearing falls out. Repeat process for the other bearing.

Search next time?