big wheel problem

[grantinator]

[/IMG]
I dont know if you can tell but the outside ring of the bearing is stuck in the wheel does anyone know how to fix this?

 

[Noah Scoots]

flathead and hammer

 

[Tyler P]

Put a small flathead screw driver up against it form the other side of the wheel as if getting a bearing out of the wheel and hit it with a hammer.

 

[Jacobo]

^^^^^^^^^^^^^
both of those

 

[grantinator]

thanks for the help. its pretty much rusted in so i have another wheel but thats chunked, does anyone know how to maybe fix or just like lower the amount of how you feel it?

 

[Devin Parker]

[/IMG]
I dont know if you can tell but the outside ring of the bearing is stuck in the wheel does anyone know how to fix this?

LOL theres like 2 other threads on this.

 

[Cheezel]

i know i posted one just last week about the same thing lol use the search next time

 

[grantinator]

sorry about that i just never could understand the search thing

 

[mattyts]

What bearing?

 

[DavidCronin]

use skateboard trucks, works everytime

 

[whip20]

the best way is to get a small crowbar, wedge it in and they pluck rite out but watch out bc the crowbar might fly out or bend

 

[michaelpytel]

a hammer and flat head doesn't work all that efficiently, best way is to use a grind bit on a hand held drill or preferably a dremel. but if you dotn have a dremmil, like i said use a drill. grind out slits in the bearing and it will just fall out.

 

[Billie Rainbow]

a hammer and flat head doesn't work all that efficiently, best way is to use a grind bit on a hand held drill or preferably a dremel. but if you dotn have a dremmil, like i said use a drill. grind out slits in the bearing and it will just fall out.

can fuck slot up easily, flathead and hammer and hit it in many spots so it comes out level and easy is the most simple