Blade Brake Problem.

[scootbaseball]

K, well my brake is grinded down as much as possible so that's not the problem at all.
But when I go to put my spring in the bolt won't go through.
It's a pro spring and it won't fit in between the legs of the brakes.
This is really pissing me off.
Someone help me please.

 

[Chris Sanchez]

The legs are either bent or the spring isnt stretched out enough.

 

[scootbaseball]

I don't know how to stretch it.

 

[s.c.o.o.t]

Use your fingers and grab the 2 sticky outy things nd pull.

 

[scootbaseball]

Your fingers won't work.

 

[scooterkid999]

i have the same problem and when i put it in a vice and take it out it goes back to normal

 

[s.c.o.o.t]

put the spring on an old scooter than start sticking things under it and leave it for a while

 

[scootbaseball]

What are you talking about?

 

[konowaluk]

heat it up a lil then stretch

 

[molewood4]

use a spaanner or screw driver to push it down, them get a mate to hammer in the bolt.done.

 

[Humma]

^Works wonders

 

[Kodye Gregory]

dude get two vice grip pliers and bend the spring back. thats what i did and it works fine

 

[Chris Harris]

^^^yeah do that

 

[scooterkid999]

put the regular spring on, and the regular brake on and the bolt but dont screw it in, and bend the brake past the wheel and it stretches,

o and dont put the wheel on....hope tht helped if not i can meet u somewhere and give u a spring

worked perfect really easy and fast

 

[nicmacris1]

n00bs just put it in a vice for few hours

 

[scootbaseball]

K uh Mr. 19 posts.

 

[zolof]

hes been here longer than you lmao

 

[scootbaseball]

I know dude I'm jkin I know who he is lolll.

 

[s.c.o.o.t]

Boil a jug of water then put some in a cup then drop your spring in the boiled water, wait a 1-2min take it out and step on it (make sure you have shoes on)

I know this works coz I did it about 10 minutes ago, coz I had the same problem as you.

 

[FITTEAMTRAIL]

Do Blade brakes square your wheels off more than stock?