blunt stripper bars wont fit in razor clamp

[jdm009]

i just received blunt stripper bars and i was sliding the clamp on and the clamp seemed massive and i don't know what to do. has this happened to any of you guys

 

[Isiahloya]

try wrapping your bars in electrical tape until the clamp is snug, but dont cover the slit

 

[Isiahloya]

sorry for double post but it also might be an oversized clamp, if so get a shim or make one out of a soda can

 

[jdm009]

thanks that helped i was going to try and make a shim but the tape will work until i getta new clamp