BMX grips

[209-Scooters]

I used brake cleaner it dried in 4 minutes

 

[FestonGross]

I use a aircompressor (is it called like that? like, its a tank wich is pumped to like 200psi and air blows out really hard)
I put on the small thingy, and put the grip on for about 1" and put the small thingy under the grip and let the air expand the grip so you can slip it on to your bars. Works every time.

ya i do that too. works the best.
hairspray sucks BAAAAALLLLSSSSS

 

[JonMeadows]

use TAG or AXE spray,
Dries quick!

 

[mcdonald93]

just put them on with nothing...i just take them and put them on and smack the ends like 10-15 times and they're on and dont move at all...

 

[JonnyJonDogg]

HAIRSPRAY!! lock thread

 

[beastlycaptain]

wd40 dries in 10mins.

 

[Steve Moore]

use TAG or AXE spray,
Dries quick!

really? haha never tryed it

 

[Matt]

Go to the local golf store (if you have one) and they sell this stuff for very cheap that is made for golf grips, it works perfect and it is some kind of glue to i guess, so it sticks very good

 

[codyferner]

be a man, use you hand

 

[codyferner]

be a man, use your hand

 

[arifur794]

just ride ur scooter without any grips.
HARDCORE

 

[asianpuff16]

loll^
just use hair spray or zip ties

 

[dre]

Use zip ties, it is the BEST method no matter what anybody says. Basically, slide 5 or so zip ties in the grip and spread the evenly around the inside. You MUST keep the side with the square thing on the zip tie, facing out of the end of the grip, not the flange side. Then, push the grip onto the bar with the zip ties still inside. It should slide on pretty easy. Then, once the grip is in place, pull the zip ties out, one by one. Takes about 2 minutes, NO throttle grip, no waiting for the liquid to dry, and no blisters from sliding the grip on without anything.

wow, that's a fucking amazing idea!

 

[vantagerider]

why do you even need spray or anything just slide em on it takes like 5 minutes but it doesnt need to dry and you dont have to ruin them to get them off

 

[Hep Greg]

do people really still have trouble getting grips on? i can put new grips on without anything to help in like 2 minutes. its really not hard at all.

 

[Axiom]

rubbing alcohol also works well, it evaporates in less than 5 minutes.

 

[Eriiik]

Just flush some water thrue them and then put then on. Its so easy and works very vell.

 

[ben-pat-bro]

SOAP
hahaahahah

 

[Humma]

believe it or not i used lynx and it worked >.>

 

[Jason]

Put your grips in hot water, the heat will expand the rubber as well as make it more stretchable. As it cools it'll go tight again.