broken fork help me >.<

[ScootingFred]

ok, so my forktube broke today, and the piece of the forktube gets stuck in the bottom of the t-tube, i dont know how to get it out.

 

[Brian Boston]

If theres a piece hanging out you gotta get a pair of channel locks and try to twist it out with them. Its pretty hard to do, your better off just getting a new tube.

 

[diikforre]

yeah dude just get a new steer tube

 

[DavidMiles47]

same happened to me i just got a new steer tube and fork

 

[keons5]

Yeah, grab a new tube and fork, and make sure that your reinforce the new fork properly so that it doesnt happen again!

 

[mat]

you could try heating it or jamming some sort of expansion nut (star nut or bar end type thing) in there and pulling it out from that

 

[ScootingFred]

ahh, too much trouble, i thought maybe there was an easy wy to do it, so i could save my steer tube, whatevs

 

[etscoots]

this happned to me about amonth ago i took a hack saw and cut the peice of the fork inside the t-tube where theres a straight line thru the t-tube where u can see the fork stuck in there then i got a pair of pliers and took it out

 

[Rory.c]

dude re inforce your forks, if u run pro model forks, get an old broken t tube the right size, put like i layer of tape on it, and tap it in, its saves your forks for a bit longer...

 

[latinoboy69]

^^ yup best thing to do

 

[ScootingFred]

dude re inforce your forks, if u run pro model forks, get an old broken t tube the right size, put like i layer of tape on it, and tap it in, its saves your forks for a bit longer...

ugh, telling me like i dont know...., ok that doesnt make it unbreakable, and honestly, i dont do that anymore cuase it really doesnt last any longer with that in there.