Buff Bars

R

Ryan Murray

Member
Hi, my name is Ryan Murray. These new forums make it impossible to tell who people are so before you reply do one thing for me, write your display name that i will rember from the old forums. This is how your reply should look like.
Ryan Murray: I would like to trade a deck for your buffs.

Okay. now on to the good stuff.

Buffs:
-they are 19 high (no slits on them) by they are however wide you want (I can make them whatever you want) of you want the original crossbar that is aluminium they will be 16 wide, if you want em wider the crossbar will be chromoly.
-They are raw aluminium. with no bends or cracks

What I Want:
-ANYTHING.
-Main things are 100mm metal cores. only black or white urethane.
-Bars that are no lower than 18 high. and no skinnier than 15 wide.
-Half knuckle.

Note:
-In the picture they do not have the 16 inch crossbar on.
-They do have slits. The slits are now off.

IMG_8950.jpg

IMG_8953.jpg

Photo11.jpg



Micro:
-110mm
-No signs of debbing. Very good condition and lots of urethane left.

What I want:
-Anthing besides plastic cores.
-Mainly 100mm wheels that have either black or white urethane.

Note:
-It looks like it is dehubbing but trust me it is NOT. it just has a little bit of dirt right there.

Photo1-7.jpg
 
You must log in or register to reply here.
Top