buff bars

L

lachlanm

Member
Hey boys I am looking at buying some buff bars but I don't know what I need to buy to run them. I have a stock razor pro. any help would be appreciated
 
E

Eric Magray

Steel Member
all you need to do is buy them. no special parts needed. just buy the bars and swap out your old ones with the buffs.
 
D

Derek Scootz

Member
if you dont have your fork heavily reinforced, i HIGHLY suggest that cuz the little extra weight and solidness of buffs will cause your forks to snap. just a t tube will not work, take my word for it
 
T

team_punishment

dargersaurus rex
Derek [FS said:
]
if you dont have your fork heavily reinforced, i HIGHLY suggest that cuz the little extra weight and solidness of buffs will cause your forks to snap. just a t tube will not work, take my word for it
Click to expand...
i just broke mine yesterday with my buffs. i forgot to reinforce it the night before.
 
J

JAM3S

Steel Member
you need to like file out your forks so the bars will fit over the thread just take it the metal fabrication or something theyll do it for around 70 bucks.
 
Z

zack

Member
Jamesss said:
you need to like file out your forks so the bars will fit over the thread just take it the metal fabrication or something theyll do it for around 70 bucks.
Click to expand...

or just use a grinder which most ppl have, or shit you could just go buy a nice dremel for 50 to do it which can be used for alot of things. or just buy a 3 dollar file.
 
J

jeff26

Member
well if your using stock forks, i suggest a seat post. if your using a v2 sr fork, you dont need to reinforce.
 
You must log in or register to reply here.
Top