Cant get bearings out of eagles>.<

[Willhouse [SLC SIG SCOOT]]

how?

 

[Matthew_D]

if it has a spacer in it, move it to the side then put a axle or bolt through so the bolt is resting on the spacer then hit the bolt with a hammer.

 

[Hogan]

go to a skate shop and use there bering press

 

[Matthew_D]

go to a skate shop and use there bering press

there bearing press gets bearings out?????

 

[nitroRCs]

Some skateshops dont have them, and some dont work on all wheels...

Just do the spacer axle trick

 

[Gaston]

Hit it hard

 

[Michael Rankin]

dont make the same thread more than once

 

[toolis11]

i tryed the axal trick ku thats what i always do but i snaped the axel

 

[Matthew_D]

i tryed the axal trick ku thats what i always do but i snaped the axel

o ya that happend once, try to find a bolt you dont care about or a stripped axle.

 

[SOA]

doesnt seem like the poster is going get this info

but indeed a axle is the best way if your spacers slides sideways

another tip eagle told me, is to turn your oven on to like 90" degress place the wheel in the oven, until the temp heats close to 90" then take the wheel out & try the aluminum explains then its easyer to slide out

NO it wont fk or melt the wheel unless you do it too long above 90` degree

i think eagle use a special heat plate to do the job

 

[Bear Grylls]

^^ to much work

 

[Billie Rainbow]

that^ i got ways even for them shit eagle spacers but if i told you, your head would explode

 

[COzzie89]

is there a way to get the bearings out of mgp signature wheels? cause the spacer wont move..

 

[Jossy]

if u use a eagle spacer, use an allen key. put it on the innermost metal part of the bearing and hit it on the ground. did ur head explode? no. thanks for tryin billie

 

[Mattscoot]

i usualy just put it in a vide and use a flathead and a hammer,
but i just bought some eagle spacers so now im a lil worried