changing to threadless?

[Michael L.]

i have a R.B.L 3.0 and i'm looking into different compression systems. If i were to change from threaded to threadless, what would be the new parts that i need (i don't care about what type of compression that it is), and what are the cheapiest ones on the market? thanks

 

[madzach22]

Well you would need a

New headset : http://acesneightsscooters.com/District-Basic-Unsealed-1-1-8-Headset-BLK-HSB.htm

ICS Kit : http://acesneightsscooters.com/Aces-Eights-ICS-Internal-Compression-System-ICS-COMP.htm

And new Forks: http://acesneightsscooters.com/Forks_c10.htm

or you could get

New headset : http://acesneightsscooters.com/District-Basic-Unsealed-1-1-8-Headset-BLK-HSB.htm

Blunt IHC forks: http://acesneightsscooters.com/Blunt-Declare-IHC-Alum-Forks-BLK-FIHCBK.htm

 

[gjdadj]

Ics kit

 

[Michael L.]

would i need to get new bars aswell?

 

[Broccoli1]

Cheapest would be to just install a Threadless headset and keep the same fork- use the Locknut on top of the Threadless dust cap.

Standard bars will fit all SCS- some require a shim and a starnut in the forks

ICS= Standard bars but requires driving a starnut into the bars

Blunt/EnvyIhc= standard bars

HIC Compression = you'll need to get Oversize bars and a starnut in the forks

 

[iliveinahouse1]

buy a cheap threadless headset and district forks because ICS comes with the forks

 

[Rob.]

Threadless fork and HIC bars w/ shim included.
And a threadless headset.