Crown race

[Tools!]

i just bought a tilt Intergrated headset and i cant get the crown race to sit nice on the fork, Can someone please help

 

[Alex Collins.]

Hammer it harder applying even pressure around.

 

[Tools!]

Hammer it harder applying even pressure around.

But how do i apply even pressure i dont have a crown race installer, what is an alternative way for me to do this? with tools laying around my shed

 

[Im A Ninja :)]

Try using a pipe or some old bars to push it down

 

[Tools!]

Try using a pipe or some old bars to push it down

Thanks man, Used my old bars to get it on and it worked perfectly!

 

[KyrinBingaman]

Yeah, you could use a pair of bars to pound it down on too. I didn't use my bars so what I did was I took a 5 pound weight and just tapped it down on until it was flush with the fork race, another thing you could do probably is tighten your compression and the fork race would probably level out with the fork.

 

[Tools!]

Yeah, you could use a pair of bars to pound it down on too. I didn't use my bars so what I did was I took a 5 pound weight and just tapped it down on until it was flush with the fork race, another thing you could do probably is tighten your compression and the fork race would probably level out with the fork.

Thanks for the help man!