Deck designs

[Pete Pachota]

I just had an idea of a deck, inspired by the construction of a knowped, so I drew it:

it might need some reinforcemet pipe/pipes welded in the headtube area but dunno, knowpeds have only one pipe and theyre fine.

If you have another deck or even other part designs, post it here. You may use the program Sketchup, either a free version (Google Sketchup) or a cracked one. If you don't want to. or don't know how to use it you can use practically graphic program, including MS Paint, haha. Or you can even post a description of your idea and either me or someone else might draw it.

 

[Madis]

it would need an extra little tubes between the two pipes under the deck so it wont deform. The headtube area needs a better idea :/

Tell me how would you put on the deck? Bolts? Weld? If it's not gonna me nice and clean, then it would disrupt the grip tape and the pipes from the under if you would want to grind with it.

 

[Pete Pachota]

As you might see its a wooden deck, so It might be bolted directly do the pipes, but a better solution would be to have steel plates welded to the pipes and the deck bolted to those plates, just like on a knowped.

And yeah, a single rectangular pipe would do as a reinforcement for the front.

 

[Madis]

reinforcements in 2 places at least under the deck between those two pipes... one in front, one in back, near the brake. maybe one in the middle.