eagle wheels

G

gnarwarz

Member
Kyle Tolentino said:
Lol, what a retard. He put the bearings in than taped them to the wheel. Omg I can't stop laughing!!!!!!! That's what you get for trading at TIC, CJ CJ CJ. I had respect for you for a while but I just totally lost it. LOLOLOLOLOL!!!!!
Beachsk8er77 (6:21:02 PM): tape you fuckkaass.
Treihart39 (6:21:10 PM): i did
Beachsk8er77 (6:21:15 PM): did it work?
Treihart39 (6:21:21 PM): not really
Beachsk8er77 (6:21:41 PM): you need to tape the inside then put the bearings in
Treihart39 (6:22:38 PM): inside like around it?
Beachsk8er77 (6:22:43 PM): mhm'
Treihart39 (6:23:05 PM): ll try that
Beachsk8er77 (6:23:24 PM): thats what your suposed to do you idiot not tape over the bearings -_-
Treihart39 (6:23:39 PM): lol i dint no
Click to expand...

lawlkitties
 
Rob.

Rob.

Admin
Staff member
zolof said:
you mean your protos?
Click to expand...

Can you read, at all?

Eagle Wheels said:
Pitty most are not telling that they hammer the bearings in wrong or that they used wrong size spacers..
Anyhow, just get the right size spacer in , tighten well and nothing happens......
Otherwise use some Locktide and glue the outside of the bearing........`PROBLEM` solved...simple
Click to expand...

Oh, so it's never a wheel problem with eagle wheels, it's user error. [/sarcasm] And locktide your bearings into the wheel? What if they're expensive bearings? I've never even had that problem with stock wheels.
js.
 
ISCOOTPA

ISCOOTPA

Bronze member
ya...i was told by some ppl that the wheels are supose to come like i got them so the bearings go in easy but when i tightend them they would still woble....but im just upset about the slight dehubbnessss
 
humpurple kushiones

humpurple kushiones

Steel Member
.Rob. said:
zolof said:
you mean your protos?
Click to expand...

Can you read, at all?

Eagle Wheels said:
Pitty most are not telling that they hammer the bearings in wrong or that they used wrong size spacers..
Anyhow, just get the right size spacer in , tighten well and nothing happens......
Otherwise use some Locktide and glue the outside of the bearing........`PROBLEM` solved...simple
Click to expand...

Oh, so it's never a wheel problem with eagle wheels, it's user error. [/sarcasm] And locktide your bearings into the wheel? What if they're expensive bearings? I've never even had that problem with stock wheels.
js.
Click to expand...
nope. the way cj put them in was bad. eagle knows that there wheels were to thin and there answering that with thicker ones. about locktide.. idk just use tape.
 
C

CJ Treihart

I got myself banned.
k this is how i put the bearings in i put one bearing in top using a vice adn then i went to eat dinner and couldnt fine my vice so thene i put grip taoe on my bearing and hammered the last one in no spacers
 
Rob.

Rob.

Admin
Staff member
That was a shitty joke.
js.
And i've malletted all my bearings into basically all wheels i've used.
No problems.
 
Hep Greg

Hep Greg

Administrator
ive never ovalized an eagle. EVER. i really dont understand what you guys are doing to get your bearings in.
 
humpurple kushiones

humpurple kushiones

Steel Member
.Rob. said:
That was a shitty joke.
js.
And i've malletted all my bearings into basically all wheels i've used.
No problems.
Click to expand...
every wheel you have had... micro metal cores (xt ones) with bearing cups, and plastic cores. nothing to ovalize
 
K

knuckles94

Member
i used a vice and i put oil around the outsides of my bearings i use spacers i put them in heaps strait
and there ovalised i tried tape wheni squeezed in the bearins on the VICE the tape pushed out of the sides i am heaps shocked hep gregs never ovalised 1 wow???????
 
You must log in or register to reply here.
Top