Easy afordable and long lasting peg design

[mx-rider12]

Go to your local hardware store and buy a 3/8in grade 8 steel bolt. You also need 1 or 2 old wheel spacers and some some washers. You need 3 regular sized 3/8 in nuts to bolt it on. 3in is the longest i would go in the front or you might run into clearance issues. In the back go as long as you want, but i wouldn't go past 4-5in to avoid the posibility of bending the bolt.

 

[Meep94]

probally would bend if ridden hard enough but why not use a socket way stronger n easier so really not a good idea

 

[scooterpro]

yeh sockets are the way to go and really funn

 

[AX3D]

.. I'm confused.. so your peg is basicly a bolt with spacers?

 

[DavidMiles47]

.. I'm confused.. so your peg is basicly a bolt with spacers?

 

[young08]

yeh sockets are the way to go and really funn

 

[razor_rider_12]

definatly they slide way better

 

[team punishment]

put up some pics of your scooyter with your pegs

 

[grantcarlin]

crap picture because it was taken with my fone