meh, got bored.But since the tricktionary turned out pretty good, i thought this might to.Everypart on a scooter (but not going TOO technical...) :
Key:
ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Black: Razor/JDBug B-Model parts
Blue: Micro parts
Yellow: Fuzion parts
White: French ID parts
Grey: Classic SR/PROTO Scooter parts
Green: Wee Scooters parts
Red: Yak Research parts
purple: RAD Skoot Co. parts
orange: Inward Scooters parts
(By the way example pictures would be nice)
Bars: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ??Â
One Piece Bars: a whole bar in itself, just one piece (eg.Wees, SlaYers, RADs) ââ?? ââ?? ââ?? ââ?? ââ?? (often called "one pieces" or "1pc bars")
Two Piece Bars: consists of just a "Steertube" and a "Crossbar" (ââ?? ) (often called "two pieces" or "2pc bars"
Three Piece Bars: consists of a "Steertube", a "Stem", and a "Crossbar) (often called "Fake Buffs", "3 Pieces" or "3pc Bars")
Grips: (eg. Shadow Embassy, Animal Edwins)
Deck:
Deck with folding mech: (ââ?? ââ?? ââ?? ââ?? ââ?? )
|_Frame:
|_Deck Plate
Deck without folding mech: ââ?? ââ?? ââ?? ââ?? ââ??Â
Headtube:
|_Neck Plates: Joins the "Folding mech and "Headtube" together, these can be doubled up for extra strength.
Griptape: (often called "Grip"
Brake:
|_Brake-spring: (often just called "spring"
|_Brake Bolt:
Wheels: (ââ?? ââ?? ââ?? ââ?? ââ?? )
Forks:
|_Fork-tube
|_Fork-arms: the plates on both sides, holding the wheel in place.
Threaded: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Threadless: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Polyurathane: the surface of the wheel
Plastic-core: (eg. Stock Wheels, Green Machines, Yak Original Wheels, Agent Oranges, etc
Metalcore: a core made of metal, stronger than "Plastic-core" wheels. (eg. Micro Metalcores, EagleSport Metalcores, Yak "Scat" Metalcores, etc)
Bearings:
Wheel Spacer: (often called "spacers"
Bearing Holder:
Clamps:
Quick-release Clamp: (often just called "Quick release")
Head-clamp: (often just called "Clamp")
|_Double Head Clamp: (often called "double clamp, "dub clamp", or just "clamp")
Quadruple Head Clamp: (often called "Quadruplie clamp", "Quad clamp", or just "Clamp")
Bolts:
Folding Mech Bolts: (often called "Foldy Bolts" or "Mech Bolts"
Front Axle Bolt: goes through the fork and wheel/bearings, which gives it a center of rotation. (often called "front bolts")
Rear Axle Bolt: goes through the dropouts and wheel/bearings, which gives it a center of rotation. (often called "rear bolts"
Brake Bolts: goes through the brake hole/dropouts and brake.
Stem Bolts: goes through the Steertube and Stem to that the Stem is fixed in place
Compression Bolt: an M6 bolt that's usually about 7-8 inches long.
Stunt peg
Additional Parts: (ââ?? ââ?? ââ?? ââ?? ââ?? )
Deck Reinforcements: Pieces of metal bolted onto the deck to make the deck last longer and increase its strength.
|_Square Box Reinforcements: Deck reinforcements in a "Square-shaped form"
|_Metal Strip Reinforcements: Deck reinforcements in a flat strip form.
|_"L" Shape Reinforcements: Deck Reinforcements in an "L"-shaped form
|_1-Piece Reinforcement : a big plate that goes underneath the deck and fixes onto both sides
"Stunt" Pegs (ââ?? )
Wheelie Bar (ââ?? ââ?? )
|_Straight:
|_Curved:
Alternative Parts:
Deck Pins: Alternative to "Grip tape"
Folding Mech Plates: Alternative to Micro's "Folding Mechanism"
Internal Deck Reinforcements: Deck reinforcements that fit inside of the deck. Alternative to "External Deck Reinforments"
"Welding" the "Folding Mechanism": Alternative to "Bolting" the "Folding Mechanism"
Inverted Compression System ( ââ?? ) : Alternative to "Thread Lock Nut"
|_Compression Bolt
Standard Compression System : Alternative to "Threaded" and "Inverted" "Compression Systems". (ââ?? )
|_Quadruple Clamp: to hold both the Bars and Fork in the top and lower sections.
|_PROTO/BMX Headset Top Cap
|_"PROTO/BMX Headset Top Cap" Bolt
|_1 1/8" BMX Starnut
|_Shim adapter: For bars with a smaller outer diameter. (ââ?? ââ?? )
T-tube Bolts: Altenative to "Quick-release Clamp"
Reinforcements:
External Deck Reinforcements: (ââ?? )
|_Square Box Reinforcements
|_Metal Strip Reinforcements
|_1-Piece Reinforcement
Internal Deck Reinforcements:
|_Square Box Internal Deck Reinforements
Forktube Reinforcement: a tube with an outer diameter of 1" that fits into the Fortube of most forks and acts as a "reinforcement"
Wheel reinforcements: usually hot glue or another strong industrial adhesive to increase the strength of the core (this is only really necessary with "Plastic-core wheels".
Compatable BMX/FMX/Motocross Parts:
Grips
1 1/8 Threaded/Threadless Headsets
"Straight-up" Stems
Seatposts
1 1/8" (Standard) Starnuts
1 1/4" (Oversized) Starnuts
Compatable Skateboard Parts:
Bearings
Trucks
Grip-tape
Any tools that you'd ever need for Building up a scooter:
Allen Keys:
|_
|_3mm (Folding mech bridge centre bolt)
|_4mm (Folding mech bridge outer bolts,"Internal Folding mech Reinforcement bolt, "Folding mech" to "Deck" bolts)
|_5mm (front/rear axles,stock bolts for folding mech,Single/Double/Quadruple Head clamp,T-tube bolts,"Headset Top cap bolt" front/rear truck bolts, Folding mech)
|_
|_
|_
"x"-headed Screw driver: Removing "Multi-Mount clip" ("JDBug/Micro/French ID Scooters)
"flat"-headed Screw drive: Removing "Folding mech rings" removing "Folding mech threads"
Adjustable Spanner/Wrench: tightening/loosening Folding mech bolts/Deck Reinforcement Bolts/tightening nuts on skateboard trucks.
Skate Tool: putting on/taking off skateboard trucks.
Starnut Installer: Installing "starnuts".
Hammer: Installing "starnuts"/"Headset Cups".Removing Headset cups.
Vice: Installing "Headset cups"/Straightening bent "Crossbars". (?)
Hacksaw: Cutting down "Crossbar"/"Steertube" (for "SCS"),slits for "Bars"
Simple Diagram Drawn up by Madis Kukk (if he doesn't mind):
Key:
ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Black: Razor/JDBug B-Model parts
Blue: Micro parts
Yellow: Fuzion parts
White: French ID parts
Grey: Classic SR/PROTO Scooter parts
Green: Wee Scooters parts
Red: Yak Research parts
purple: RAD Skoot Co. parts
orange: Inward Scooters parts
(By the way example pictures would be nice)
Bars: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ??Â
One Piece Bars: a whole bar in itself, just one piece (eg.Wees, SlaYers, RADs) ââ?? ââ?? ââ?? ââ?? ââ?? (often called "one pieces" or "1pc bars")
Two Piece Bars: consists of just a "Steertube" and a "Crossbar" (ââ?? ) (often called "two pieces" or "2pc bars"
Three Piece Bars: consists of a "Steertube", a "Stem", and a "Crossbar) (often called "Fake Buffs", "3 Pieces" or "3pc Bars")
Grips: (eg. Shadow Embassy, Animal Edwins)
Deck:
Deck with folding mech: (ââ?? ââ?? ââ?? ââ?? ââ?? )
|_Frame:
|_Deck Plate
Deck without folding mech: ââ?? ââ?? ââ?? ââ?? ââ??Â
Headtube:
|_Neck Plates: Joins the "Folding mech and "Headtube" together, these can be doubled up for extra strength.
Griptape: (often called "Grip"
Brake:
|_Brake-spring: (often just called "spring"
|_Brake Bolt:
Wheels: (ââ?? ââ?? ââ?? ââ?? ââ?? )
Forks:
|_Fork-tube
|_Fork-arms: the plates on both sides, holding the wheel in place.
Threaded: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Threadless: ââ?? ââ?? ââ?? ââ?? ââ?? ââ?? )
Polyurathane: the surface of the wheel
Plastic-core: (eg. Stock Wheels, Green Machines, Yak Original Wheels, Agent Oranges, etc
Metalcore: a core made of metal, stronger than "Plastic-core" wheels. (eg. Micro Metalcores, EagleSport Metalcores, Yak "Scat" Metalcores, etc)
Bearings:
Wheel Spacer: (often called "spacers"
Bearing Holder:
Clamps:
Quick-release Clamp: (often just called "Quick release")
Head-clamp: (often just called "Clamp")
|_Double Head Clamp: (often called "double clamp, "dub clamp", or just "clamp")
Quadruple Head Clamp: (often called "Quadruplie clamp", "Quad clamp", or just "Clamp")
Bolts:
Folding Mech Bolts: (often called "Foldy Bolts" or "Mech Bolts"
Front Axle Bolt: goes through the fork and wheel/bearings, which gives it a center of rotation. (often called "front bolts")
Rear Axle Bolt: goes through the dropouts and wheel/bearings, which gives it a center of rotation. (often called "rear bolts"
Brake Bolts: goes through the brake hole/dropouts and brake.
Stem Bolts: goes through the Steertube and Stem to that the Stem is fixed in place
Compression Bolt: an M6 bolt that's usually about 7-8 inches long.
Stunt peg
Additional Parts: (ââ?? ââ?? ââ?? ââ?? ââ?? )
Deck Reinforcements: Pieces of metal bolted onto the deck to make the deck last longer and increase its strength.
|_Square Box Reinforcements: Deck reinforcements in a "Square-shaped form"
|_Metal Strip Reinforcements: Deck reinforcements in a flat strip form.
|_"L" Shape Reinforcements: Deck Reinforcements in an "L"-shaped form
|_1-Piece Reinforcement : a big plate that goes underneath the deck and fixes onto both sides
"Stunt" Pegs (ââ?? )
Wheelie Bar (ââ?? ââ?? )
|_Straight:
|_Curved:
Alternative Parts:
Deck Pins: Alternative to "Grip tape"
Folding Mech Plates: Alternative to Micro's "Folding Mechanism"
Internal Deck Reinforcements: Deck reinforcements that fit inside of the deck. Alternative to "External Deck Reinforments"
"Welding" the "Folding Mechanism": Alternative to "Bolting" the "Folding Mechanism"
Inverted Compression System ( ââ?? ) : Alternative to "Thread Lock Nut"
|_Compression Bolt
Standard Compression System : Alternative to "Threaded" and "Inverted" "Compression Systems". (ââ?? )
|_Quadruple Clamp: to hold both the Bars and Fork in the top and lower sections.
|_PROTO/BMX Headset Top Cap
|_"PROTO/BMX Headset Top Cap" Bolt
|_1 1/8" BMX Starnut
|_Shim adapter: For bars with a smaller outer diameter. (ââ?? ââ?? )
T-tube Bolts: Altenative to "Quick-release Clamp"
Reinforcements:
External Deck Reinforcements: (ââ?? )
|_Square Box Reinforcements
|_Metal Strip Reinforcements
|_1-Piece Reinforcement
Internal Deck Reinforcements:
|_Square Box Internal Deck Reinforements
Forktube Reinforcement: a tube with an outer diameter of 1" that fits into the Fortube of most forks and acts as a "reinforcement"
Wheel reinforcements: usually hot glue or another strong industrial adhesive to increase the strength of the core (this is only really necessary with "Plastic-core wheels".
Compatable BMX/FMX/Motocross Parts:
Grips
1 1/8 Threaded/Threadless Headsets
"Straight-up" Stems
Seatposts
1 1/8" (Standard) Starnuts
1 1/4" (Oversized) Starnuts
Compatable Skateboard Parts:
Bearings
Trucks
Grip-tape
Any tools that you'd ever need for Building up a scooter:
Allen Keys:
|_
|_3mm (Folding mech bridge centre bolt)
|_4mm (Folding mech bridge outer bolts,"Internal Folding mech Reinforcement bolt, "Folding mech" to "Deck" bolts)
|_5mm (front/rear axles,stock bolts for folding mech,Single/Double/Quadruple Head clamp,T-tube bolts,"Headset Top cap bolt" front/rear truck bolts, Folding mech)
|_
|_
|_
"x"-headed Screw driver: Removing "Multi-Mount clip" ("JDBug/Micro/French ID Scooters)
"flat"-headed Screw drive: Removing "Folding mech rings" removing "Folding mech threads"
Adjustable Spanner/Wrench: tightening/loosening Folding mech bolts/Deck Reinforcement Bolts/tightening nuts on skateboard trucks.
Skate Tool: putting on/taking off skateboard trucks.
Starnut Installer: Installing "starnuts".
Hammer: Installing "starnuts"/"Headset Cups".Removing Headset cups.
Vice: Installing "Headset cups"/Straightening bent "Crossbars". (?)
Hacksaw: Cutting down "Crossbar"/"Steertube" (for "SCS"),slits for "Bars"
Simple Diagram Drawn up by Madis Kukk (if he doesn't mind):
