finally good forks !!!!!! and i freaking hope the links work!!!!!

[predator6790]

they look alright, probably wont do much though

 

[dre]

sam ur fork is crap go die.

hahaha dude you are a faggot sam has one of the most solid scooters I've ever seen, thing is TANK

Coming from the bitch that bought 200 dollar pants and did a pussy bail and ripped em.

why don't you go run mouthfirst into a dick. a) sams fork is way better than anything your dumb ass could ever make, and b) it's not your fucking business to care about how much money chase spends on a pair of pants. Who cares if he rips them, it's his problem, not yours, so lay off his back about it and grow the fuck up.

hahahhahhahahahahahahaa wow first of all i have forks that i could make that would be 10000x better but i dont wanna spend 300$ on the first fork. And the gangster wanna be douche can do what ever he wants im just saying its a dumb thing to do. God i try and help someone and you guys get pissed off, every day when i come back to this im pretty sure less and less people wanna come back.

well I wouldn't be on your case if you weren't deliberately trying to be a douche. By telling sam that his fork is shit and he should go die is 100% you trying to start a pussy ass internet bitchfest, and you got what you want. Are you at least happy now?

 

[Ben Scoots]

haha woww, how about instead of all of your guys bi*ching about his forks YOU go make some that you like...at least hes trying.

Dre here my first post, i wasnt try to start --- i was just saying atleast he is trying and sams gotta be a big man and show his fork that has some plates welded to it. And Chase u may get --- but i bet there so ugly you put bags over there faces and pretend there someone else. Why cant someone make there own stuff and not have to take --- from other kids. Its rediculous.

 

[mat]

are you seriously gonna fight on the internet with sam? you know your just asking for a dicking in the first degree right? yeah sams fork doesn't look great, but its strong and gets the job done. hes not trying to mass produce or sell them, he just reinforced his. you guys are the worst kind of noobs. stfu.

tl;dr: RAAAAAAAAAAAAAAAAGE

 

[Chris Picone]

We're allowed to say that we think its stupid, no? He's charging $60 for a shitty "reinforcement" to a Pro fork that probably makes it weaker and is more expensive than a threaded sr fork was.

 

[demo]

look, this websight is a privalage, yeah i made some wrong statments and stuff. but im trying to inprobve the scooter world all my intentions are good. and im not trying to rip peoples off. i have desided to let sr and french Id do the fork making... i sorry for this thread... and all i wanted out of you riders is to tell me what is wrong with them and how i can make them better... this was not suppost to be a internet fight. it was suppost to be a way to improve scootering... hopfully.... and i only how a few post because my old profile got lost in my old computer. and i forgot the password... but just keep in consideration this sight is for making scootering better not worse.

 

[SharkStammler]

yup for $1 any color including anodized... no crome thought

you can only anodize aluminum.... unless your talking about plating it with zinc or something else like that.... because i already looking into anodizing and it only works for aluminum

 

[demo]

yeah kinda i have this powder coating thingie that will anodize steel and aluminum but the metal has to be really shiney for it to work:[

 

[D= its sam!!]

are you seriously gonna fight on the internet with sam? you know your just asking for a dicking in the first degree right? yeah sams fork doesn't look great, but its strong and gets the job done. hes not trying to mass produce or sell them, he just reinforced his. you guys are the worst kind of noobs. stfu.

tl;dr: RAAAAAAAAAAAAAAAAGE

much love <3

but yeah "demo" if u wernt acting like a dick and took every1s feedback you could have get ideas to improve ur fork, so yeah,

i cba to say anymore lmao

 

[Big L]

I am REALLY disappointed in Murphy

 

[dre]

I am REALLY disappointed in Murphy

hahaha, he definitely doesn't come on here enough



And ok, enough with the internet bitchfest, I admit I probably did take it a bit far, but I just think it's pretty low of you (Benn) to talk shit about other people's work behind the safety of your computer screen and then bitch people like chase out because of his clothing choices. Not cool dude.

 

[demo]

yeah i did act like a dick and im sorry for it. matt your forks are awsomefully, you should really build them.. oh i would like to try to build them but NOT to sell... is it ok with you?

 

[demo]

i dont know how to delet this post... so i didnt double post :[ how....???

 

[molewood4]

they look cool

 

[molewood4]

and strong

 

[stukwon-do]

They're just stock forks with a bit of steel tube welded to them....

 

[idk47]

and the welds are stronger then them mild steel,

WRONG. ask any welder who doesn't have asbestoses.

From Wikipedia's page on 6061 aluminum:

Welding

6061 is highly weldable, using tungsten inert gas welding. Typically, after welding, the properties near the weld are those of 6061-0, a loss of strenngth of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece.

Yeah 6061 ALUMINUM. That's steel that he welded dude.

 

[demo]

ian thanks for supporting me. and stukwon-do. the steel tubing that is added on the side will keep them from bending sideways. and the razor fork on the inside will keep the tubing from bening forward on impact. well i think it will anaway... do you think this will work??

 

[ridescoot14]

sam ur fork is crap go die.

hahaha dude you are a faggot sam has one of the most solid scooters I've ever seen, thing is TANK

Coming from the bitch that bought 200 dollar pants and did a pussy bail and ripped em.

why don't you go run mouthfirst into a dick. a) sams fork is way better than anything your dumb ass could ever make, and b) it's not your fucking business to care about how much money chase spends on a pair of pants. Who cares if he rips them, it's his problem, not yours, so lay off his back about it and grow the fuck up.

Wheres murphy?haha i want to see him go ape shit on your ass

yes, that's one of the first things I told myself when I saw this thread haha

and not only that, at least I am out scootering and doing handrails while simultaneously getting more pussy in one weekend then you'll ever get in your life, while you're sitting at your computer jacking off to images of a pro fork with 2 metal dildo's welded to the side. if you wanna know what a real pu$$y feels like, go stand in a corner and hug yourself real tight, ya cunt

hahahahahahahahaha

 

[Chris Picone]

and the welds are stronger then them mild steel,

WRONG. ask any welder who doesn't have asbestoses.

From Wikipedia's page on 6061 aluminum:

Welding

6061 is highly weldable, using tungsten inert gas welding. Typically, after welding, the properties near the weld are those of 6061-0, a loss of strenngth of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece.

Yeah 6061 ALUMINUM. That's steel that he welded dude.

If a highly weldable metal loses that much strength, you think similar metals would too?

You don't quite get it. The finished product can never be stronger than the sum of its parts. It's like adding 2+2 and expecting 5.

After welding, a number of distinct regions can be identified in the weld area. The weld itself is called the fusion zoneÃ?Æ?Ã?¢Ã?¢ââ?¬Å¡Ã?¬Ã?¢ââ??¬Ã?Âmore specifically, it is where the filler metal was laid during the welding process. The properties of the fusion zone depend primarily on the filler metal used, and its compatibility with the base materials. It is surrounded by the heat-affected zone, the area that had its microstructure and properties altered by the weld. These properties depend on the base material's behavior when subjected to heat. The metal in this area is often weaker than both the base material and the fusion zone, and is also where residual stresses are found.[29]

The Aluminum content also applies to steel: the weld and area around it is weaker than the base metal. So he probably made it worse.