french id with scs

[ian h.]

ok i have checked every website that sells french id bars but none of them has the scs compatible option when buying the bars but i have seen photos of the bars with the scs on there. is there a website that sells them with the scs option or is it just go cut the slit off? please comment back =)!

 

[DevonIs1337]

I have mine running with SCS, but you're going to have to cut the slit off to do so.

 

[ian h.]

dang is hard to cut the 2 inches off the bar and does it still run just as good as any other scs slit

 

[DevonIs1337]

it's not hard to do at all. just remember that SCS adds roughly 2 inches to your bar height, so technically, if you cut off 2 inches from your bar it will cancel out and you'll have the size you started with anyway.

 

[Steezeman]

But if you want to get those extra two inches you can put an old forktube in your bars so they don't clamp down.

 

[Andy Mickey]

yeah since they only make frids 21 high and you ride higher than that, don't cut the slit off, do what alex said or anything piece of solid tube lol.

 

[ian h.]

ok ill do that. wait i thought they make frids 18in high also