Frid fork with brass knuckles

[bcbwillbecool]

ok i got a frid fork and knuckles on friday and when i looked at my fork today i could see some of the glue at the bottom like there is a milimeter of a gap maybe smaller. Is anyones fork like this? I also got it pinned. I'll have pics up tomorrow. Does anyone run frid forks with knuckles that they got from SR?

 

[Zacmoore]

this happend to my freind tyler its because the knuckles are pulling the stear tube and when u do bunny hops and stuff it pushes the legs up witch mae it come off if this makes sence its like if u had a wall with a hole and a stick thru it and lets say the object on the other side of the wall was bigger than the hole and you tried to pull the stick out the object is gonna come off just like ur french id

 

[bcbwillbecool]

isn't it going to make a difference if it is pinned

 

[AlmonC9]

juss a question..
I have a french id fork with knucks and when i slide the knucks on the fork it juss slides down the fork tube very easy..Do i need like a custom shim for the bottom part of my knucks?Also it seems when i ride the compression stays tight for about 2 hours then it comes loose like the knucks are rising up the fork tube and it juss gets loose as shit..
Any help?

 

[Jason]

Have you guys even put the starnut and cap inside?

 

[Dom Marconi]

Have you guys even put the starnut and cap inside?

hahahahaaaaaa

 

[stefan hefner]

shut the fuck up jason.
my glue started coming out and my scs never would stay tight so i took it off and the starnut ripped out and the forktube ripped like 1/4th off.
so yeah

-tyler wheeland

 

[Zacmoore]

yay tyler he was the one i was deminstraighting in my story

 

[Jason]

Then put a nut on the underside of the bolt going through the starnut?

Hurf durf logic.

 

[bcbwillbecool]

tyler was it pinned???

 

[Matthew Madera]

im tight, cuz this is what i planned to run

 

[bcbwillbecool]

if it's pinned it shouldn't break but i'm going to get mine welded professionaly on the inside

 

[Jacob Alexander]

pics?

 

[BenTen]

if it's pinned it shouldn't break but i'm going to get mine welded professionaly on the inside

DONT WELD IT
ITS FINE AS IS

 

[coryM]

Didnt really read everything but this could just as easily happen with bars that are clamped to the fork as well.
This really has nothing to do with scs and everything to do with the fork.
They better get this shit fixed asap cause FrID fork was gnar until i started hearing about this shitz happenin.

 

[Tylerr.]

nah my scs is what ruined it
if i woulda used an ICS on it it woldnt have pulled out my starnut from the forktube or pulled the legs of...

 

[saltwater]

In theory i think a ICS wouldn't have this problem.
It kinda suck this is happening, i'd put a grub screws/bolts on each side

 

[bcbwillbecool]

again tyler was it pinned???