front wheel turning problem

[WayFastRevo]

when i ride my scooter sometimes after tricks my front wheel turns (mostly right) and I always have to kick it back. everything is super tight on my scooter. does anyone know how to stop this??

 

[Knuckleballer32]

your t tube clamp is not tight enough causing it to turn when bumped

 

[skooterkid]

your t tube clamp is not tight enough causing it to turn when bumped

yeah, it could be the t tube clamp, tighten it with an allen wrench

 

[gil_]

its either that clamp or ur bending ur fork but if u say everythings really tight then im gonna say its ur fork

 

[Lil Steve]

No its not the fork. Make sure the clamp is all the way down and make sure the clamp is really tight.

 

[WayFastRevo]

yea the clamps are super tight. how would the fork be bent if i can move it back?? thanx for the help

 

[Lil Steve]

Your welcome.

 

[WayFastRevo]

i was just saying thanks beacause u guys are trying its definatly not the clamps(they are soo tight)

 

[jeff26]

tighten your front axle? if your ttube is bolted is the hole just barely big enough for the bolt or is there alot of extra space?

 

[dec3193]

i dont no if this has anything to do with it, but r ur bars screwed down far enough?

 

[Lil Steve]

That can be the problem too but I think its that the clamp isnt all the way down.

 

[Eric Magray]

if youre still having problems, i would say just change your fork, and still make sure everything is nice and tight.

 

[P4RK3R]

it could be a bad clamp, like a new a clamp. double up on clamps or get a pro model clamp and the problem is solved. i'm selling a pro model clamp in my thread in sell your stuff if you need one

 

[WayFastRevo]

yea they are two old a clamps.
and i think its the head tube.
but before i change the headtube im going to try all your sugestions thanx for the help

 

[chet-star]

a double clamp would help most probobly solve your problem

 

[DaNnYc]

if your fork is reinforced you might have broken your fork i did the same thing a while back and my clamps were extremely tight.....also quit bumping old threads

 

[Dustin Nooner]

lmao dan<333

 

[AX3D]

check your axels dude, i took mine out the other day and they were raapppped