got RUP for xmas

[anthscoots]

I got the razor ultra pro for xmas. its pretty good. The stock bars are 18 by 26. I am 157cm tall. Should i change the bars or should i leave em? they feel abit too high.

 

[Mason. A]

cut em done to 22 or 23

 

[anthscoots]

Should i get new bars?

 

[tarrymonz]

only if you cant cut bars down, the bigger and wider they are is sweet, because there are basically no boundaries when it comes to bar height and width

 

[anthscoots]

only if you cant cut bars down, the bigger and wider they are is sweet, because there are basically no boundaries when it comes to bar height and width

So it is good that the height is 26 inches and the width is 18 inches?
And if i get different bars, what colour would match RUP?

 

[Tobias Hunter]

Im getting one!

 

[matt clarke]

dude i think 26 high is way to big for some1 thats 157cm tall id got like 20, 21 if i was u

 

[anthscoots]

matt clarke, thanks. but should i get new bars or cut these ones?

 

[Stevenson]

I just cut mine down to 21. Just cut them.

 

[ScoOter_ChilLa]

-> cut it downe too something like 23-24"

i`m too 1,57cm and i`ve got 24"h by 20"w

 

[anthscoots]

bump. I dont know what exact size to cut them to. But is it worth getting new bars for my ultra pro? Like i dont want to regret getting new bars so if i want to get the stock bars cut how do i cut them?

 

[JarradSmith]

Get RAZOR PRO stock bars (the adjustable ones) and slide them to whatever feels comfortable. Measure them. Cut your ULTRA PRO ones.

Use a metal cut off saw, angle grinder, or hacksaw.

 

[anthscoots]

Get RAZOR PRO stock bars (the adjustable ones) and slide them to whatever feels comfortable. Measure them. Cut your ULTRA PRO ones.

Use a metal cut off saw, angle grinder, or hacksaw.

I might not get razor pro stock bars.
But i already have spare bars ill use them to mesure what size i want.
Oh and yes ill use an angle grinder.
But if i cut them will i be cutting anything important?

 

[Jarryd M]

You'll need to re-cut some new slits in the bars (if you don't have an SCS).

 

[anthscoots]

You'll need to re-cut some new slits in the bars (if you don't have an SCS).

How much slits?
And does it matter what size the slits are?

 

[Riley Hughes]

How much slits?
And does it matter what size the slits are?

2 inches up, 2 slits one on each side just look at the slits before you cut them