grippers make me angry!!!

[mukiteoscoots]

i got proto grippers for christmas and i put swiss in then with spacers and they wont get dialed and if my scooter isnt dailed i get extremly pissed off . Anyone got ideas on how to fix this issue.

 

[michaelchavez]

as long is nothing is moving in an unnecessary manner i dont think theres a problem

 

[scootinjew]

your spacers in the wheels, thats the problem sometimes

 

[issac p]

make sure your bearings are in all the way

 

[mukiteoscoots]

ther all the way in useed a press and they move from here | to \ to / (dramatic movement)

 

[Stackies]

Ovalized wheels.

 

[R-Dubya]

^ Bingo. They're Proto wheels, they come ovalized. If the dialed issue really bothers you that much, put tape in the bearing slots.

 

[mukiteoscoots]

^ Bingo. They're Proto wheels, they come ovalized. If the dialed issue really bothers you that much, put tape in the bearing slots.

but i dont have death click... maybe its the ninja click!

 

[mukiteoscoots]

^ Bingo. They're Proto wheels, they come ovalized. If the dialed issue really bothers you that much, put tape in the bearing slots.

but theres no death click... Maybe its the ninja click!

 

[R-Dubya]

I don't have death click either.

 

[mukiteoscoots]

hmm ill try taping them later im lazy

 

[BrandonWeir]

If you're really committing to having those bearings in there you can put hot glue around them and they'll never give you problems again, but you gotta be super careful so no glue gets in the bearings. And you'll never get those suckers out to grease or replace them hah.

 

[mukiteoscoots]

If you're really committing to having those bearings in there you can put hot glue around them and they'll never give you problems again, but you gotta be super careful so no glue gets in the bearings. And you'll never get those suckers out to grease or replace them hah.

Those fuckers are in there!! i used a hydraulic pressand the wheels have been riden for a few days and i dont think they would ovalized. ill try my krunk bearings

 

[Robert]

so your going to go from swiss's to krunk haha

 

[mukiteoscoots]

so your going to go from swiss's to krunk haha

ya big step down but they did nothing to help it be dailed

 

[Sam_Hudson]

bitch ass kids make me angry

 

[mukiteoscoots]

bitch ass kids make me angry

That right there. Made you the sickest kid on SR!...Fucker

 

[Scott Freibaum]

They come ovalized sometimes. Use the tape method. As long as your wheel doesn't like slide back and forth you're fine.

 

[colemanhebert]

man the fuck up and ride it

 

[alexallupinthis]

use the hammer thing, works like a charm

 

[Birdy_scoots]

I got my protos grippers for christmas and got modus bearings. i pop the bearings in and the spacer still moves in inside the wheel but as soon as i put the wheel onto to my scooter it stops moves and its so Dialed!

Just try to tighten your wheel as tight as it goes and it should stop moving.