headsets

A

abraham08

Member
im goin to get fsa but dont know how to install them... if someone can can they post a vid how to install them from the start to the end? or if someone can explain in text from start to finish... it would really really help!!!
 
Michael Rankin

Michael Rankin

Super Moderator
1.first you have to hammer out the old cups from your headtube. i use a hammer and a stock steering column or a hammer and big screw driver for this.
2. then hammer in the new cups. start off by lightly tapping the cup directly with the hammer just to get it started. after you get it started, get a block of wood and put it on top of the cup. do not directly pound the cup all the way in or run the risk of bending and breaking the cup. the block of wood prevents the cup from being damaged. then just put in your bearings and assemble your scooter and you are done
 
L

LirimPerasevic

Member
they are easy to install just get out the stock bearing cups hammer the fsa cups then take off the old bearing race off ur old fork then put on ur new fsa bearing race then put on the bearings and black rings then insert that fork in the headtube and then put the dust cover and compression thingy on ur fork and then put on ur clamp on ur bars and then tighten and go ride
 
T

Thomas Kananen

Member
Mike Rankin said:
1.first you have to hammer out the old cups from your headtube. i use a hammer and a stock steering column or a hammer and big screw driver for this.
2. then hammer in the new cups. start off by lightly tapping the cup directly with the hammer just to get it started. after you get it started, get a block of wood and put it on top of the cup. do not directly pound the cup all the way in or run the risk of bending and breaking the cup. the block of wood prevents the cup from being damaged. then just put in your bearings and assemble your scooter and you are done
Click to expand...
 
You must log in or register to reply here.
Top