HELP NEEDED on a special brake mod...

S

scooterinsanity

Member
for a little while now iv wanted to go brakeless but i know cus i ride ski my foot will get jammed in the wheel,
iv thought about putting like a cover over my wheel where my brake would go but have side plates aswell so
my foot wouldnt get jammed in it. i need to know how i would weld it ( what type of weld ) or if it just wouldnt work all together?
 
Remco

Remco

Member
you will have to make it out of the same aluminium as your deck. And just take it to a welder. Or you have a TIG welding machine at home, but I guess not, so just take it to a welder. should be fine.
 
J

jgmurch

Member
you should just weld on the stock brake. works terrific, no wiggle, no wearing wheels and it looks better that brakless.
 
H

Humma

Steel Member
or put a bolt through the brake so it cant go down.

like its resting on the deck (the bolt)

someone has to have pics.
 
K

knuckles94

Member
put to side plates on the brake and mig or tig it
to the deck and the brake and no it doesnt have to
be the same type of aluminium
 
DMazz

DMazz

Steel Member
just go brakeless your foot doesnt get jammed in the wheel the wheel just slides on your foot if you hit it and like slows you down a little bit but after a little bit you get use to keeping your feet away from it
 
J

JackDillon

Member
Dylan Kasson had this sweeeeet wheel cover fender thign that andrew made for him once, Picutres should be flaoting around here some place.
 
You must log in or register to reply here.
Top