Help with rup setup?

[9cdmc]

I want to get a new threadless headset and scs for my rup which is all stock except wheels and grips. Sense the fork is threaded, is there anyway to make it threadless so i can run it with scs till i get new forks? or could you guys please recomend what i should do and buy ? my stock headset is totally screwed and i want a new headset/fork setup. thanks

 

[Darwin.]

you can stretch out the scs and put it on ur threaded forks

 

[Mikey G]

Don't do that ^^, the fork will cut grooves in the SCS, weakening the contact surface for clamping, then also ruining the SCS.

Either cover the fork in epoxy putty or jb weld, then sand it to a thin layer that resembles the fork tube thickness or what'd i reccomend, run it as is until you break the fork or get enough money for threadless forks.

 

[9cdmc]

Don't do that ^^, the fork will cut grooves in the SCS, weakening the contact surface for clamping, then also ruining the SCS.

Either cover the fork in epoxy putty or jb weld, then sand it to a thin layer that resembles the fork tube thickness or what'd i reccomend, run it as is until you break the fork or get enough money for threadless forks.

Thank you I will probably get a thread less headset and scs and then save money for forks, but can you go into more detail about making the forks threadless

 

[gjdadj]

i converted my forks to threadless.... it cost me $10 and it works aaaammmmaaaazzzziiiinnnngggg!!!! yeah, do it