Help wth Blade Brake Installment

[TomHiette]

me again,

Well... Tommoz im hoepfully getting a Blade brake from my freind's scooter. He dosnt use his scooter so he is going to give it to me.

I am going to put it on my pro...

I was wondering on how i can install it to work perfectly. No rattle or sound when ridden.

I cant use a Grinder beacause i dont have access to one.

Help would be appreciated

 

[murrayw]

u can use sandpaper but that would take a shit load of time

 

[Mattt.C]

Just use a bastard file.

 

[gerkin of honour]

This is what i do. it is the easiest BTW.
if you have access to a hand file just file the part of your deck where your brake touches. also i tried sand paper but it did nothing. because i also didn't have access to a grinder at the time

 

[TomHiette]

And does ur brake make no rattle or shit Tom?

So file down the deck where the blade touches? Or where the Pro Brake currently is?

 

[gerkin of honour]

it shouldn't rattle. and if it does. take out your brake spring and bend it in by putting something really heavy on it.
also file it (take all brake parts off, break, bolt, spring ect.) and at the top part of the rectangle area where your brake is. so that the brake can sit forward more.

 

[TomHiette]

Ok sweet.

I have encounted a problem though. My friend cant get the brake out. Its riverted in there so u cant use allen keys to remove it.

Sugesstions on how to remove it...? Please.

 

[gerkin of honour]

use a 5mm drill piece. put it in a drill and drill out a little bit of the bolt on each side