Help!!

[KrookedCranium]

I need to know how to take the deck off of a razor. I see that theres four nuts by the folding mech. i took out two of them and the other two are like hard to get out. please help me find out how to get it out. thanks.

 

[brad dooly]

are you stupid

 

[KrookedCranium]

nah. i just started two days ago and just broke my scooter on a tailwhip.(my first one.) i just wanna know how to take it off. dont be a dick.

 

[Zaηe]

Do you want the headtube aswell?

Otherwise you'll have to take out all the pins or bolts and stuff holding the headtube to the deck.
But if you want the headtube with the deck you'll have to take off the forks with the locknuts and stuff.
Anymore questions?

 

[MaTt.OnE]

bhahaha i knew all this shit before i could tail whip (1 day) and yes the post above me ^^^thats some dammmm good info son!!!!!

 

[KrookedCranium]

Do you want the headtube aswell?

Otherwise you'll have to take out all the pins or bolts and stuff holding the headtube to the deck.
But if you want the headtube with the deck you'll have to take off the forks with the locknuts and stuff.
Anymore questions?

im trying to take off the folding mech along with the headtube

 

[Tobias Hunter]

Mate your best bet is YouTube. Use it.

 

[KrookedCranium]

tried. theres nothing

 

[Billie Rainbow]

hmm has it occurred to you that the mech is welded on? so that aint happening but you can take the headtube off no worries

 

[KrookedCranium]

hmm has it occurred to you that the mech is welded on? so that aint happening but you can take the headtube off no worries

its not welded on. i dont have a pro model. im just trying to get parts off of an old a which is BOLTED on.

 

[Spicy McHaggis]

Here is EXACTLY what you do.

Take a saw zal (SP) and cut off the foldy
OR
get duct tape and wrap it around the foldy, then take a hammer and hit the foldy 3 times not 4 times or it wont work, then take a phillips screw driver and take off ONE TINY strip of tape, Then you grab a beer drink that really quick, then your gonna wanna make sure the scooter is at room temperature for this one, cover it with a rag and vacuum a dirty rug or carpet in your house and maybe the floor mats in your car and maybe do an oil change on it as well and maybe wash it too, then take off the rag and remove the tape and your done!

You can thanks me laterz

 

[Michael Rankin]

its not welded on. i dont have a pro model. im just trying to get parts off of an old a which is BOLTED on.

Then how about next time you specify on what deck or parts you have. It's not that difficult.

 

[Aldo8250]

take off the clam and bars then unsrew thos e two nuts that are the headset... take the fork off and you are done... the folding mech is most likely welded on the inside cuz on my old a it was welded soooooo have fun

 

[Dustin Nooner]

how about you guys start helping out and stop disrespecting.

did you get your scooter apart like wanted to yet man?

 

[Spicy McHaggis]

no i didnt but thanks for caring Noonerator

P.S. nice voicemail last night haha

 

[Zaηe]

Maybe he's trying to get the headtube out of the foldy?

 

[KrookedCranium]

fuck it. it broke today. i think its time to get a pro model.

 

[iscootscoot]

i need to know how to take the deck off of a razor.

get fucked!!!!

 

[sebharris]

Thank god your getting a pro model,