HIC compression

[SCOOTorDIE!]

Does anyone have a spare HIC compression that they could sell . beacause i got 1 3/8 bars and no compression.

 

[ztkAZ]

Does anyone have a spare HIC compression that they could sell . beacause i got 1 3/8 bars and no compression.

goes in looking to buy section my friend

 

[Thom Cat]

http://www.tsiscooters.com/EShop/Pr...roductID=a6abf7f9-8667-4def-a55e-f1dfa6f8e5f7

 

[Mario Rocchio]

You don't like the baby knuckle?

 

[kurt warren]

standard 1 1/8"(id) and 1 1/4"(od) tube i believe. and starnuts and top caps are all around you

 

[SCOOTorDIE!]

You don't like the baby knuckle?

the top bolt striped and everything is stuck together. i rather use the baby scs but i cant. do you know how to un strip it?

 

[chrismscoots]

the top bolt striped and everything is stuck together. i rather use the baby scs but i cant. do you know how to un strip it?

the top bolt on my knuckles stripped and i got my friends pap to drill the head of the bolt off. then on the other side of the bolt he got a small drill bit, drilled a hole in it, jam some allen key in it and twisted it out.

 

[SCOOTorDIE!]

the top bolt on my knuckles stripped and i got my friends pap to drill the head of the bolt off. then on the other side of the bolt he got a small drill bit, drilled a hole in it, jam some allen key in it and twisted it out.

i would do that but i dont exactly know how and i dont want to fuck the baby scs up.

 

[Steezeman]

Go to a bike shop and see if they'll use an ez out to get it out, or just go to a hardware store and buy one.

 

[fritz loves his ritz]

saw in tha middle of ur scs until u cut through the bolt and then take the head out of the bolt then take plyers and twist tha other side out!!!!!!!