Hic problem!?

[joshpring]

Hi,
I have the purple blazer pro forks with internal thread, neco hic kit, can creek sealed headset and when i tighten this hic so it doesnt rattle etc. the headset is like incredibly tight and then when i don't and have it so so tight so it spins fast and doesn't wobble too much and put the bars back n it comes loose within like 10 minutes? so i was wondering if someone could help me out on what to do?

 

[Michael Aylsworth]

scs FTW!!

no but just use locktight. should fix it.

 

[Broccoli1]

Blue Lock tite and tighten the Compression so that your bars only make a 1-1/2 revolutions when you spin them.

 

[All-Weld]

Yes...like he said, blue thread-locker. and make sure you clean all/any grease off the threads first or the thread-locker will not work properly.

 

[joshpring]

Ok thanks, but where can i buy blue lock tite?

 

[joshpring]

scs FTW!!

no but just use locktight. should fix it.

I have tried the blazer scs with mgp batwing bars which i cut the slit off and have spacers etc, but they just kept coming out of lline and the headset coming loose.

 

[Broccoli1]

Ok thanks, but where can i buy blue lock tite?

Auto Parts stores and most Hardware stores just make sure you get the BLUE

Not the Red

 

[joshpring]

ok why is it so important i use blue?

 

[joshpring]

this one says 'Medium strength-easily undone with normal hand tools.' http://www.google.co.uk/imgres?q=1+...52&tbnw=95&start=0&ndsp=23&ved=1t:429,r:9,s:0

 

[Collin.]

Red is alot stronger, youd never be able to get your bolt out again.

 

[joshpring]

Ok but i've found a red one and it says the its 'Medium stregnth and easily undone with normal hand tools.'

 

[joshpring]

This one? ^http://tiny.cc/9v6m1

 

[grantinator]

does your shim have a slit in it because that happened to me when mine didnt

 

[joshpring]

yeah

 

[Broccoli1]

This one? ^http://tiny.cc/9v6m1

That is the correct one- wee bit confusing since the Bottle is Red but the liquid inside is BLUE

 

[joshpring]

Ok ive bought it and put it on the bolt tonight, i'll tell you how t works tomorrow etc