home made fork

[EthanFoster]

I heard it is possible to make your own fork and would like to know how, I have a general idea for the dropouts but not the steer tube. Please post any pics and how tos.

 

[Mark Abramsky]

there are no dropouts nor a steertube on a fork

 

[nate-O.S.K]

theres a fork tube and legs tho

 

[Dylan Jordan]

No kidding smart asses, cut him some slack...

And, just make your own model, and ride it , if it works good for you, if it doesn't.... Well you might get hurt.

 

[Jakee F]

Dylan thinks hes smart.
dont listen to him.

 

[andrew62396]

i think you're just better off buying a New Fork

 

[blake dietzler]

i made some of my own.i got the lame razor a forks with the rubber block type thing and i cut it up to there. then i got square tubbing and welded it to the plat form. they came out crooked=/ anyways. there super easy if u have the right materials....do u have a jigg?

 

[Mattt.C]

Its harder than you think, mate.
You need to know about metals, and welding
and to come up with a good design and then find someone to make it.

 

[ashz893scootys]

i made some alright forks

 

[ryanlovegays]

yeah ash made sr style forks they r heaps sick aye

 

[RTP]

You could copy off the inwards scooter forks design, ive made a few, just need square tubing, A bit of flat bar for the top plate and use an old steerer tube off razor forks or something like that, all you need to do is cut them to size and weld them up and try them out.

 

[Mario Rocchio]

actually forks do have dropouts. they're at the bottom of sr forks, and basically all bmx forks. some scooter forks dont really have "dropouts" but whatevsss.