how can i get a 125 yak to fit my fork

[chris_scooter]

hey guy i just want to no how u can do it like put a 125 yak on my fork plzz help me thanks

 

[Joe Manson]

you cant fit them on stock forks

 

[chris_scooter]

so what do u do then??

 

[Steve Moore]

1. Buy new forks.
or
2. Don't ride 125 mm wheels

 

[Scott Trainer]

125s fit on my old a forks. try one of them if u can

 

[Steezeman]

You know how the steertube comes down through the fork, and is welded at the bottom? Like, right above the wheel? You gotta go right there and grind it down, then it might fit. It depends if the wheel is worn down or not.

 

[dezbert]

Yup^^^


If it's not worn down, then i don't know what to tell you. But try anyway.

 

[mat]

125s can fit in stock forks, dont listen to the noobs.

just do what alex said, you only need to grind down a little bit. you can do it with a file. as far as i know the wheels dont need to be worn down to fit if you have ground down the fork.

also, while on the subject, wearing down big wheels to make them fit smaller forks is really really dumb. why not just use smaller wheels?

 

[JonnyJonDogg]

You know how the steertube comes down through the fork, and is welded at the bottom? Like, right above the wheel? You gotta go right there and grind it down, then it might fit. It depends if the wheel is worn down or not.

i had to do that to fit 110MM WHEEL.

 

[JoshToy]

Buy an Inward fork, or find someone who sells aftermarket Razor product. Like Razorama or something. And buy a 125mm fork from there. Best bet for strength is an Inward fork though.

 

[gerkin of honour]

125mm yaks don't fit in stock forks no matter how grinded down they are. i grinded down my stock forks to fit a (wannabe 125mm wheel) razor wheel which is actually like 120mm and that just fit. but because i grinded it down the forks snapped at the legs......so don't grind it down. it just makes it weaker.

 

[Josh Herman]

You know how the steertube comes down through the fork, and is welded at the bottom? Like, right above the wheel? You gotta go right there and grind it down, then it might fit. It depends if the wheel is worn down or not.

^^^^

 

[LirimPerasevic]

i have a 125 mm fork buy one off me for 15 shipped?

 

[kurt warren]

if u grind it down, which is wat im doin, its good to check alot to see if it just fits,dont go crazy and weaken the damn thing. its really good if the forks r welded next to the fork legs cos then u dont have to grind much =)

 

[jayke4sport]

hmm buy smaller wheels

 

[JonnyJonDogg]

just wear it down loads in back then grind the fork down?

 

[Kay Are]

wont that fukk up the welds and make the fork weak

 

[mcdonald93]

i dunno my friend mike did that and it was fine

 

[asianpuff16]

grind the topp part evenly it should work

 

[Kritzer]

ya buy a bigger fork