How do i clean my headset

[Jess ingrao]

Hey guys i have a blunt envy intergrated headset. i was riding in the rain the other day and managed to get dirt in the bearings.. whats a good way to Clean my headset so its back to new ?

thanks for the help.

jesse

 

[Jess ingrao]

Bump

 

[KyrinBingaman]

Take of the orange seals, I used a tool pick, then soak them in 70 or 91 percent isopropyl alcohol, dry them off, re lubricate them with white lithium grease or some sort of grease (stay away from wd40 as it will rust your bearings since wd40 is water based) put your seals back on, should spin like butter.

 

[Jess ingrao]

Take of the orange seals, I used a tool pick, then soak them in 70 or 91 percent isopropyl alcohol, dry them off, re lubricate them with white lithium grease or some sort of grease (stay away from wd40 as it will rust your bearings since wd40 is water based) put your seals back on, should spin like butter.

Thanks man appreciate it.

 

[Calvin]

Take of the orange seals, I used a tool pick, then soak them in 70 or 91 percent isopropyl alcohol, dry them off, re lubricate them with white lithium grease or some sort of grease (stay away from wd40 as it will rust your bearings since wd40 is water based) put your seals back on, should spin like butter.

also never use water, for future reference.