how to install inwards ics

[mattttyler]

so i know there is a starnut that goes in the bars, but whats on the other end?
is there a starnut in the forks too or at the bottom of the forks with a washer cause in the pic on inward theres a tiny washer but idk what its for

 

[salamiiscooter]

the washer is for the bottom of ur bolt.
put the star nut into ur bar, but just above the slit or it will go to far then ur fucked..
chuck ur brs on and put the bolt up through ur forks (only if there is a small hole or it wont work).
then tighten it up and then tighten ur clamp

 

[mattttyler]

the washer is for the bottom of ur bolt.
put the star nut into ur bar, but just above the slit or it will go to far then ur fucked..
chuck ur brs on and put the bolt up through ur forks (only if there is a small hole or it wont work).
then tighten it up and then tighten ur clamp

yeah but what do you mean only if there is a small hole

where is the hole??

 

[Rob.]

between the legs
naah, i think inward has a little hole/plate welded in the bottom of their forks.
what kind of fork are you using?

 

[mattttyler]

my friend is getting some forks either zero offset or extreme and he and his dad are going to copy them and design their own so imma get them for free

 

[mattttyler]

wouldnt it also work to put the top cap of the headset on the bottom on the forks with the compression bolt through it and it will act like a giant washer if the washer inward supplies it with does not fit?