how to make a sr or inward style fork?

[spitfire0453]

Can someone please make a thread on how to make a homeade sr or inward style fork.

The material's and step's in making it.

 

[humpurple kushiones]

id delete this if i were you, your going to get flamed so bad

 

[spitfire0453]

idc

 

[humpurple kushiones]

dude people are going to tell you to get one from inward or sr and not answer

 

[spitfire0453]

It's not that I want to make one, It's just that I'm curious on how and the steps on how they make it.

 

[Chris Harris]

lock pointless thread your never going to get the answer

 

[scootbaseball]

I'm pretty sure they just cout the metal to a certain shape and then weld them together?

 

[murrayw]

dude just get some pipe and weld struts to them and then weld another pipe that fits in to your bars

 

[JDBen]

or...

 

[JonnyJonDogg]

isnt it obvious?

get the right size metal cut it to shape and weld?

steel

 

[ryankeong]

Ghetto homemade fork tutorial
1.Get a stock fork cut the legs off with a saw/grinder
2. Get a piece of 5mm or 6mm plate and cut it to the size shape you want making sure there is enough room for the wheel and a washer on each sideas well as the thickness of the fork leg
3. cut your fork legs to size so they are evencut the bottom on a 45 degree angle then drill an 8mm hole in each fork leg making sure they line up perfectly (NOTE) this is probably the most important part if they are the tiniest bit out the wheel will not sit straight and will totally f.uck up your fork.
4. Weld everything together.

lol cant be bothered making this detailed or getting pics becasue you wont make it or use this anyway

 

[Steven_T]

lol..Dont make threads trying to get peoples designs so you can try and immitate them. You wanna make your own forks, fine go ahead. But dont expect people who make some of the best forks on the market, to come in here and just Tell you how. Dont make a thread like this again.