How to put 2 Pegs In Front and Back ?

[JUSTDOWORK]

How can I put 2 Pegs In The Front And Back ?

 

[TUC]

how couldnt you?

 

[parrish]

leave sr?

 

[DavidCronin]

depends on the bolts you use

 

[Drew Kelly]

get a long 5/16 bolt and shove two on their. your welcome

 

[Dom Marconi]

You won't be able to fit a socket in the peg, so to tighten it, just put an allen key in the one part of the axle, and stick a flathead screwdriver in the other peg between the nut and the inner surface of the peg, and tighten it with the allen key

 

[parrish]

or use a socket peg and just use the size nut the socket is

 

[Nick Griffin <3]

it doesnt work that way

 

[parrish]

look at your sig
thats all i have to say

 

[TUC]

or just use a razor axel? how thick is the part of your peg that takes up axel space? i made my own pegs on a lathe and they are really nice and thin there so you can run one of them on each side and still use the stock razor axel...

 

[DJ Lee]

get big sockets and use reg razor bolts. kinda like TUC said

 

[adriloko]

get 2 pair of tilt street pegs and mount it, you can put 2 in front and in the back

 

[JUSTDOWORK]

where can i get tilt street pegs and how do i mount

 

[toddjamin]

just use stock MGP or Razor axles, they're allen heads at each end, you can easily get allen keys down the peg. ive used MGP axles with pegs for ages with no probs.

 

[alec logan]

or you could run two different types of pegs, such as hardline and tilt.

 

[JUSTDOWORK]

I Just Want To Know What Do I Need To Buy To Put 2 Pegs In The Front And Back, How Do I Install 2 Pegs In The Front And Back And Where Do I Buy Whatever I Need.

 

[Chris Weik]

axels idk the exact dimestions locknuts put one peg on on end and another peg on the other and the hardware store

 

[Kyle]

I'm pretty sure Lloyd (quebec scooters) sells them.

 

[TUC]

I Just Want To Know What Do I Need To Buy To Put 2 Pegs In The Front And Back, How Do I Install 2 Pegs In The Front And Back And Where Do I Buy Whatever I Need.

man seriously how clueless are you? obviously you need your pegs, stock razor axels and two allen keys. you then put the axels through the pegs, dropouts, spacers if applicable and wheels and then tighten the axels with the allen keys. /thread

 

[ConnorD]

if you have QCS pegs i'm pretty damn sure they dont fit stock razor axles. So I would say just go to a hardware store and get the right sized bolt