How to put fork race on.

[Grant.Twisted]

I always here people have problems getting there fork race on.
SCS:
But the EASIEST way if you have an scs is to just slide the fork race on then take your scs and pound the race on to the fork. It goes on super easy and you don't need to use a hammer or screwdriver ect.
HIC
If your not running scs then hopefully you have hic. Then all you have to do is slide your bars over your fork and pound the race on with your bars.

If you don't have an scs or oversized bars then unfortunately your going to have to find something that fits smoothly over the fork, or use the old method of a flathead screwdriver and a hammer.

 

[bar_to_face]

I used an old hic shim. Worked nicely

 

[thealexbuffery]

once i tried the bar pounding method with threaded forks and standard sized bars and i got the bars stuck on the fork haha

 

[Robert]

All I do it cut a slit in my fork race if it doesn't already have one.

 

[Austin Forkner]

Most of the headsets I've had have had slits in the crown race but if it doesn't have a slit then I have a piece of tubing that fits the race perfect and I just tap it on with that.

 

[Hamish C]

I just put it on with my fingers and make sure its straight then tighten my SCS and it pops on as I tighten it or just tap it on with the bars