How to reinforce your fork to stop your legs from bending! (pics included)

[saltwater]

I got bored today so i thought i'd go down to my shed ...

You will need a welder, a fork and some flat piece of metal

Step 1.
Get a fork take off the bearing race, find a flat bit of metal about 2-2.5cm's wide and cut it so there's 3-5cm over hang on each side of the legs. And also check to see if it fits with the wheel of your choice.

Step 2.
Weld in and around the fork, be careful not to weld on bearing seat.

Step 3.
File and grind welds evenly but not to much, If you want to fit lager wells sizes you can grind an arch into it.

And there you go a reinforced fork that will stop your legs from bending!

 

[scootbaseball]

Niceee.

 

[alexiorio]

SZ forks aha.
Nice though.

 

[konowaluk]

they look ok just grind some of the welds so it looks cleaner

 

[dezbert]

They look good.

 

[natethegreat]

they look ok just grind some of the welds so it looks cleaner

 

[SOA]

i did this agers ago & i think andrew, also did Scooter zone did it after us, but yeah they will still bend you need make it all way down

 

[blaine142]

i just made one of these like a month ago and i put a .83 threadless pipe in mine too. So awesome, i use it as a backup aside of my sr fork

 

[Taylor_Davis]

another key thing sand the fork were your welding welding to chrome isnt smart it doesnt weld good and it looks like complete crap!