Andy Rhode
Member
Ok guys today I was filming and I couldn't see the lcd screen and that caused me to get most of the rider out of the frame. So tonight I made a sunshade....
Materials:
Cardboard
Scissors
Tape
Velcro
Construction Paper (optional)
Glue Stick (only if you use the construction paper to make it look better)
Step 1. Cut a piece of cardboard the width of your screen by however long you want.
Step 2. Cut the velcro the width of your screen and apply on to the top of the lcd and bottom of cardboard.
Step 3. Cut an angled piece and tape it onto the left edge of the shade (to support it)
Step 4. Cut and glue on pieces of cardboard the size of the shade (optional)
If you did this correctly it should look something like this....
EDIT:1500th Post!
Materials:
Cardboard
Scissors
Tape
Velcro
Construction Paper (optional)
Glue Stick (only if you use the construction paper to make it look better)
Step 1. Cut a piece of cardboard the width of your screen by however long you want.
Step 2. Cut the velcro the width of your screen and apply on to the top of the lcd and bottom of cardboard.
Step 3. Cut an angled piece and tape it onto the left edge of the shade (to support it)
Step 4. Cut and glue on pieces of cardboard the size of the shade (optional)
If you did this correctly it should look something like this....
EDIT:1500th Post!