howcome?

[jake ferraro]

howcome the bars on a pro model dont go down all the way?
and the smallest they go is to high for me, im short.
any suggestions?

 

[Big L]

because you have to push in a little button on the t tube

 

[Benjie]

no you have to take out the t tube and cut it because the the t tube is longer than the bottem tube

 

[team_punishment]

the new forks are too thick for the t-tube to go through so you have to cut your t-tube. if you want to reinforce it you have to use a handelbar with lots of tape.

 

[dre]

the new forks are too thick for the t-tube to go through so you have to cut your t-tube. if you want to reinforce it you have to use a handelbar with lots of tape.

blehhhh. That barely does shit to reinforce your fork. Go to home depot, bring your fork and find a STEEL pipe that fits right in. I couldn't be fucked to go find the exact size you need to get because I believe I took off the sticker on the pipe and threw it out.

 

[JoshKish:)]

cut your t tube and then put it back in

 

[AX3D]

i tryed that. doesent work.

 

[jake ferraro]

i got it. i toke a t-tube from a new a and put it in there.
and yeah im like 4 foot 4

 

[greenhood69]

u r a tinny man r'nt u

 

[Mike Montgomery]

woah thats pretty short but still.

 

[Gascoigne]

What they said..

Cut the T-tube, Since you're so short.. Cut about 8-10" inches off. The re-insert the T-tube into the slide tube and all will be well. =]

 

[Mike Montgomery]

its really not hard to do.

 

[0mg d3d pl0x]

u have to cut it down.

 

[jaron_rides_scooter]

yea the new pro's dont go all the way down cuz of the forks i think. but yea as paul said all u have to do it cut it down.

 

[0mg d3d pl0x]

or just put new forks on, i recomend cyclone, madd if ur on a budget. Sr if you're not.

 

[ryankeong]

theres nothing wrong with the fork just the t tube hits te fork pole because the t tube is so long just cut it down like everyone said

 

[jake ferraro]

i just put in a new a t-tube

 

[Kevin11]

i think theres like a tiny metl pin in the ttube that stops it from goin up and down to far

 

[Mike Montgomery]

nice thread bump