I need help. (with pics)

C

cycle

Member
I made some 1 piece bars for my scooter, but i never measured the width off them to see if they would fit into the forks or go over the forks, but the dont they are the same width as the forks and i dont no how to make them connect like, i dont have a clamp big enough to hold both the fork and bar together.

Or i could just put some standard bars back on but i dont have the tube that goes around the forks because i cut it up.

bars001.jpg


bars002.jpg


bars003.jpg
 
J

Jdbug_rob

Steel Member
Miller said:
I made some 1 piece bars for my scooter, but i never measured the width off them to see if they would fit into the forks or go over the forks, but the dont they are the same width as the forks and i dont no how to make them connect like, i dont have a clamp big enough to hold both the fork and bar together.

Or i could just put some standard bars back on but i dont have the tube that goes around the forks because i cut it up.
Click to expand...
possibly the stupidest idea ever.
what you could do, is get a tube that fits over the fork, get like 6 inch of it, clamp that onto you fork, then bolt your bars into that.
 
C

cycle

Member
Hahaha ino but i was in college and it was my last day and it came to me make some bars so i did and hoped for them to fit.

And yea ima try that just gotta get the tube from some were.
 
C

cycle

Member
It should be the next scooter of month or week which ever it is, its soo ghetto and strong B), Donations off a scooter, or parts would be highly appreciated.
 
You must log in or register to reply here.
Top