ICS Question

[Dan Riopelle]

Ive asked this in the chatbox several times and nobody answered so ill ask it here:
I just got a French ID fork with ics and i want to know how far i need to put the starnut into my bars?

 

[Michael Rankin]

put your fork thru your headtube with all the headset parts installed, how ever far your steertube on your fork sticks out, hammer in the starnut at least that far. I would hammer it in 1 centimeter more than the length of the fork tube.

 

[dezbert]

Tap it in like .5 inches into your bars. If that doesn't work, tap it in a little more...

 

[Michael Rankin]

Tap it in like .5 inches into your bars. If that doesn't work, tap it in a little more...

that is nowhere near the rite depth. no fork tube is 1/2 inch long. tap it in at least 1.5" and it that doesnt work, just go a tiny bit further until you have a lil distance from the top of the fork tube and the starnut

 

[JohanGrunwald]

You have to measure the height of the fork that sticks out from the headtube, and then swagger the starnut a tiny bit higher than that

 

[Michael Rankin]

You have to measure the height of the fork that sticks out from the headtube, and then swagger the starnut a tiny bit higher than that

basically what i said, only you made it simpler to read haha