If you have any scooter related questions

[Scooter Mcgee]

ask here.
hopefully this eliminates the countless numbers of unnecessary threads
for those of you that can answer such queries. come back and check.

 

[scooterkillkidphil]

whats the best kinds of paint to use , when painting bars. I use something called rustoleum, but it doesnt work very well.

 

[Phoenix One]

When you paint metal, it is super important to prep the surface and primer it before painting. You have to make sure there is no oily residue on the metal (wd40, grease, etc) or the paint will not stick. Wipe it down using lacquer thinner before and after sanding. Just use a little 200 grit sandpaper and rough up the surface before using the primer. Once you let the primer dry, the paint should stick great.

 

[isaac123]

do phoenix decks work with pegs?

 

[Scooter Mcgee]

do phoenix decks work with pegs?

im guessing probably not

 

[GoGzS]

[NEW] SCOOTER MODDING SUPER THREAD! READ IF YOUR NEW! QUESTIONS WILL BE ANSWERED!

And I always tought that Brian made that thread to eliminate the endless amount of threads like this...
Notice the "questions will be answered" part...

 

[Kieran Mayhew]

thats exactly what i was just about to write
but yeah
already a thread section on this

 

[Phoenix One]

We are going to make pegs that are machined to fit our extrusion, will be available after the first of the year.

 

[TristanVesely]

Alright, ill bite.
Getting a new headset for christmas, sealed forsure. Looking at Cane Creek S-8, s-1, any other options? or which cane creek is best? Like what are the differences, obviously the more expensive one will be better somehow.

 

[majohnson1]

I'm planning on building a TSI Kukk Kruiser. Is there a way to determine the overall height of the bars from the ground after the build, given the height of the bars? I plan on using SCS and the only 125 mm fork in the store here. Thanks

 

[Blake]

do stock razor pro forks allow 110mm wheels?

 

[Tylerr.]

twan is running pegs with his?

 

[Phoenix One]

He ground a set of pegs to fit. Loves 'em

 

[Steezeman]

^^ I think he's still running PJP's (Pirate Jon Pegs).

Tristan: The only difference between the S-1 and S-3 is that one is steel and one is aluminum, respectively. The only difference between the S-3 and S-8 is that the S-8 has better bearings. You should be fine with an S-1/S-3 though, the only advantage to the S-3 is it's a little lighter and it won't rust.

 

[Randall Dalal]

do stock razor pro forks allow 110mm wheels?

Yes, but you have to take the black stopper in the fork out otherwise it wont.