inward fork problem and wheel problem

[Mark Abramsky]

fork problem: when i try to tighten my wheel it like get so tight that it barley spins and i cant fit any spacers or anything cuz there is some sort of spacer welded in and if i dont tighen it hard it comes loose and wobbles

Wheel problem: when i ride besides the fact i have deathclick on my back wheel i have a rattling noise in my wheel im almost sure its cuz my spacer is wobbling indide the wheel is this possible and how can i fix it

 

[scooterkid999]

just file down the inside of the fork then you can tighten it more and it wont come losse thats what i did

 

[Rigel Fuller]

my fork does the same thing. i dont know how to fix it.

 

[Mark Abramsky]

so file the little welded spacers.. it doest seem like it will help but maybe ill see what other ppl say first

 

[Hopesta]

filing wont help. I have forks similar to the inward ones. I went down to my local hardware and bought 5/16 spaces with a really small diameter. Smaller than the bearing itself.

 

[Mark Abramsky]

hold just to get things straight the rattling noise is on my back wheel the fork thing is on my front obviously

 

[scootermcinnis]

my inward did that at first but it breaks in don't worry no i tighten the shit out of it and it spins really fast

 

[Mark Abramsky]

ive had my inward for a while and it just stated doing it when i got new bearings

 

[cory]

yeah have to make sure u have spacers in your wheels, its not the fork trust me. either you dont have spacers in or something is wrong with ur bearings. if you do have spacers in try putting washers on your axel

 

[scooterkid999]

it deffinatly helped me when i first got my inward and now it is perfect

 

[Chris Harris]

you NEED spacers

 

[tom10pin]

spacers between ur bearings inside ur wheel should do the job

 

[Steven_T]

As everyone said spacers in between your bearings.

However this was a minor problem for some of the first Inward forks..And some people, like myself..only when riding PROTO wheels, I had to file down the inside of my Fork a bit. That was my old fork..my new one I didnt need to file at all.

 

[Taylor Feist]

guys its when you get the fork he gives you some little washers you must put on the outside on ur axel.. i just used one.. if u want i can take pics

 

[Lil Steve]

Put a spacer in your wheel and your problem will be solved. Make sure you tighten you axel ALOT.

 

[Mark Abramsky]

Put a spacer in your wheel and your problem will be solved. Make sure you tighten you axel ALOT.

my axle is as tight as can get but im uing a bolt for the back since i have reinforcments ...
cory i cant but in spacers because there is absolutly no room im thinking file it dow and put spacers in

 

[Mark Abramsky]

still no answer...

 

[coryM]

I think he meant to take your wheel off and make sure you have a spacer between each bearing inside the wheel. I dont think the inward fork requires spacers on the outside of the wheel i think the legs have built in spacers...

 

[Mark Abramsky]

here ill go take a pic like spacers dont fit