Is it safe to ride a French ID fork with spacers?

[gsp1179]

I recently bought a French ID fork off of the SR store, and I'm thinking of purchasing a pair of small (18 inch) French ID bars to go with my new fork.

Problem is, I need them at roughly 19~ high, an I'm worried that the spacer will put a lot of stress on the fork tube, especially since I do tricks that are rough on forks like flat briflips and spins.

?

 

[zacharylangille]

then dont buy french id bars. Spacers dont sound like a good idea, so just find a pair of bars that are 19" high

 

[dezbert]

Get the Medium or Big French ID's and cut them down...

 

[spitfire0453]

Get Large French Id's and give them to me. Then it will be good.

 

[jcas367]

Yeah the spacer thing wouldnt be very good, get the larges and cut them down and also get them from c4 theyre only 60.

 

[alexanderespinoza]

if you had an nx fork you could double stack seatpost clamps to raise your bar height.

 

[demo]

i have frids and i made a 1" spacer cuz i have a short headtube, and i didnt wanna cut my fork.. so i raised my nucks up a bit. dont do it. it creates a weak point it flexes