is it worth it

[VenomDog]

well i saw someone selling wheels that were hot glued i want to know is it worth doing this to ur wheels and how do u do it?

 

[Lil Steve]

Im not sure how to do it but its worth doing it to your wheels from what I heard.

 

[lloyd]

its worth doing that so that you spokes dont break so fast.

 

[william01]

how do you do it though?

 

[WayFastRevo]

1. get a hot gue gun
2. get hot glue sticks
3. put the hot glue in the gun
4. plug in the hot glue gun and let it sit to heat it up
5. while the hot glue gun is heating up get some wax paper and the wheel
6. put the wheel on wax paper
7. now use the hot glue gun to pour hot glue into each individual spoke
8. let it sit for a while to let the hot glue set (if you dont it will look sketchy, but if you dont care take it off whenever you want)

OK if you dont understand that i have no idea what is wrong with you

but really if you dont understand pm me

 

[zakmak]

wax paper sucks. it stick right to it.

i did it on aluminum foil and just put a dab of oil and let it set.
it hardened and i wiped the oil off and it worked good, came out amazing.
it is deffinitly worth it though.

 

[nick12667]

from what i heard its good to use electrical tape.

i think tommy said it, idk

 

[Hep Greg]

nah, i said it. use electrical tape. comes out nice and smooth =]

 

[VenomDog]

K thanks for all the help im going to hot glue them then Thanks for the advise and i did under stand u

 

[chrisisme]

i like having it half set then flipping the wheel. also over-pour then cut to fit with a box cutter and it'll look clean.

 

[Jdbug_rob]

nah, i said it. use electrical tape. comes out nice and smooth =]

yep!

 

[DavidMarion]

k, i get how to do it but how do u get it flat on the other side also?

 

[chrisisme]

uh, get not-low temp glue and just have it drip solid onto the bottom? or overpour and cut like me

 

[DavidMarion]

what do u cut it with?

 

[YODA_01_01]

you could try a razor blade