Iscoot Wheel problem

[Chandler Hab]

Ok this has never happened to me, but ever since i have gotten my iscoot bars my wheel starts to turn. Like an example is the wheel tilted to the right a little even if the bars are pointing straight. I have tried double clamping it, using a micro clamp, and a razor pro clamp. Does anyone know whats going on?

 

[Chandler Hab]

I know its embarassing for me but ive tried for 4 days to fix the problem. Finally thought I should post it on SR cus i know Kenny or Matt would know.

 

[Mike Montgomery]

maybe it is the headset and the nut that goes on top of it

try tightening them together really tight

same thing happened to me

 

[Chandler Hab]

maybe it is the headset and the nut that goes on top of it

try tightening them together really tight

same thing happened to me

Yeah I was guessing that. well i guess i should take it in to a bike shop cus its jammed like that,.

 

[team_punishment]

push your bars forward and then tighten them. make sure you have the little metal sleeve in

 

[Mike Montgomery]

yeah nick might be right

 

[team_punishment]

thats what jason told me

 

[Kenny O.]

My iScoots had the same problem, and then they broke. So I'm back to buffs and I love them.

 

[Snow Patrol]

stock ftw =)

 

[RAZOR-RIDER-BIKER]

weld the bit at the bottom just on top of the fork to keep the wheel align wit the bars

 

[skinner]

yea weld the headset to the fork and the headtube

 

[Lil Steve]

No, dont do that.
1) Put the shim on your bars.
2) Put the clamp on your bars.
3) Put the bars on the fork (make sure the bars are all the way down)
4) Tighten your clamp.

 

[Chandler Hab]

push your bars forward and then tighten them. make sure you have the little metal sleeve in

ive tried that.

 

[Chandler Hab]

Well i guess im just going to do what nick said again.

 

[cliphead72]

this happened to my brother and he doesnt have that little sleeve so i dont no wut to do??

 

[Steezeman]

Get a 1 1/4" DK clamp off of Ebay and it'll be good in the hood.

 

[Madis]

My iScoots had the same problem, and then they broke. So I'm back to buffs and I love them.

How did they break? Has anyone else broken/bent iScoots?

 

[Kenny O.]

My iScoots had the same problem, and then they broke. So I'm back to buffs and I love them.

How did they break? Has anyone else broken/bent iScoots?

Ill get a picture and post it in the 'Your broken scooter' thread in like 5 minutes, and yeah there have been a few other people that broke iScoots that I know of.

 

[homiegee555]

ohh yah that happened to me. u have to clamp it really really tight if u have a duoble clamp, maybe try a triple or quad clamp, but once u get it really really tight then it will stop.

 

[Chandler Hab]

ok i only have two clamps. I noticed you only have a double.. howd you get it to stop?