jdbug shock fork

[Devin Hohlbein]

how do you reinforce it? a t-tube doesnt fit...

 

[scootin jonah]

dont use them just use an old a or new a or any fork without shocks that would make it a much beter scooter

 

[Devin Hohlbein]

i know i took out the shock and put in bearings so its a ghetto sr for but i cant reinforce the tube like a normal fork

 

[scooterdave]

so is the hole to small or to big for a t-tube, if its to small for a t-tube try putting a handle bar thingy in thier

 

[keons5]

Look up in your phone book for a metal supply company. Just take your fork there and look through there stuff till you find something that is really tight. If it is a little too big, then you can sand it down and it wont take too long.

Get something that you need to hammer in because of how tight it is. Don't get something too small that you need to wrap in duct tape or something

 

[Devin Hohlbein]

i did the handlebar thing it works with a ton of tape