locking fold not on a razor but [micro sprite]

C

Chandler Hab

Bronze member
k i know this is noobish but i cant find any place to lock my micro scooter. i can lock razor scooters but i dont know how to lock micros plz help
 
D= its sam!!

D= its sam!!

Ex-Staff
tail-whipper said:
no offence (but im probably just over-exadurating,lol)

"hi,Im having trouble locking my folding mech,can u weld it for me please?"

no-one will take us seriously,thats if you try to get it done at a car garage (which is probably the only place to get it done,or if you own a welder,but if your too young,youll have to have dad do it for you,and he might not take you serously either)

what i suggest is that you use metal-to-metal bond material (found at all good work-shops) it reacts to the atmosphere and dries in seconds (be careful,lol) unfortunetly if your under 18,like i am,you'll have to have your parents buy some for you (cuz its illegal to sell any glue or solvents to anyone under the age of 18) and again,they might not take you seriously.

another alternative is drilling,but i don't own a micro so i dont know much about the folding mech on them. (i hope thats what you mean by "lock",lol).
Click to expand...

LOL y would they care? they get payed 4 it so they will do it XD thats like saying they wont fix a car thay looks ugly XD


anyway, like i always say about micros...

100_1666.jpg

WELD
 
E

ENERGY TURTLE

Member
sam shorty said:
100_1666.jpg
Click to expand...

Why would anyone want to ride a micro if you have to do all that^^^ just to make it solid? Plus they are way expensive. Razors only need 2 bolts to get them solid and when there reinforced will last quite a long time, they are a third of what micros cost.
 
D= its sam!!

D= its sam!!

Ex-Staff
well 2 be honest.... i didnt pay 4 it... so im not 2 botherd lmao, n its not that much work rly... just get som1 2 weld the foldy n ur done lol
 
E

ENERGY TURTLE

Member
Well most people arent as fortunate as you to get one for free, alot of people dont have access to an aluminum welder, razors need two bolts to make them solid, arent bad when unreinforced and they cost a third of micros so in my opinion they are clearly the better choice.
 
Y

yamamsmells

Member
may as well get a pro or b model, lock foldy reinforce deck, fork and add a few welds to the original welds that are on, micros are a waste of time lol.
 
G

godfather

Member
tail-whipper said:
I cant believe that nobody has got some balls,went to razor and said "look,nobody wants scooters that folds,we only want a scooter that'll survive a tail-whip or two.seriously (be honest) do NE of you fold your scooter? No? exactly.it doesnt matter what scooter you buy,whether it be an Razor A,2,3,Pro Mod,JD Bug,Mirco Sprite,Bullet,Monster Bullet,whatever.if you dont lock the folding mech on them,theyll just fuck up and jiggle fowards and backwards.i know that people (little kids) like to fold their scooters (also theyd have to have triangular boxes to fit them in), but they could have atleast gave us 3 bolts and heads to lock it ourselves,then everyone would be happy!!!

what i wondered is that as far as i know Ricky Warnicke was the first one to test out the pro mod,he should of said that the jiggleing is becoming a big problem.Pro mod my ass,(oops,i apoligise) if it was pro,it wouldnt keep messing around with the jiggleing.Quip-step arent even a well- known company for scooters,and youll all probably say "hold on now,the pro model is way better than quick-steps,but with quick-steps,you dont need to lock the folding mech,because it doesnt jiggle around all the time,it has something on the folding mech that tightenes it so it doesnt jiggle,if the folding mech on the micro doesnt have holes in it then you either have to drill some holes on the folding mech,and do the "original 3-bolt way" or weald it

(P.S. Sams scooter looks like the strongest scooter ive ever seen,why cant razor make them like that!!!)
Click to expand...

well said, if the pro model is supposed to be designed for us scooterers, y didnt they weld that mech shut
 
C

Chandler Hab

Bronze member
detroitstreetz said:
tail-whipper said:
I cant believe that nobody has got some balls,went to razor and said "look,nobody wants scooters that folds,we only want a scooter that'll survive a tail-whip or two.seriously (be honest) do NE of you fold your scooter? No? exactly.it doesnt matter what scooter you buy,whether it be an Razor A,2,3,Pro Mod,JD Bug,Mirco Sprite,Bullet,Monster Bullet,whatever.if you dont lock the folding mech on them,theyll just fuck up and jiggle fowards and backwards.i know that people (little kids) like to fold their scooters (also theyd have to have triangular boxes to fit them in), but they could have atleast gave us 3 bolts and heads to lock it ourselves,then everyone would be happy!!!
no fricken kidding! they should give us a choice!
what i wondered is that as far as i know Ricky Warnicke was the first one to test out the pro mod,he should of said that the jiggleing is becoming a big problem.Pro mod my ass,(oops,i apoligise) if it was pro,it wouldnt keep messing around with the jiggleing.Quip-step arent even a well- known company for scooters,and youll all probably say "hold on now,the pro model is way better than quick-steps,but with quick-steps,you dont need to lock the folding mech,because it doesnt jiggle around all the time,it has something on the folding mech that tightenes it so it doesnt jiggle,if the folding mech on the micro doesnt have holes in it then you either have to drill some holes on the folding mech,and do the "original 3-bolt way" or weald it

(P.S. Sams scooter looks like the strongest scooter ive ever seen,why cant razor make them like that!!!)
Click to expand...

well said, if the pro model is supposed to be designed for us scooterers, y didnt they weld that mech shut
Click to expand...
 
D= its sam!!

D= its sam!!

Ex-Staff
tail-whipper said:
detroitstreetz said:
tail-whipper said:
I cant believe that nobody has got some balls,went to razor and said "look,nobody wants scooters that folds,we only want a scooter that'll survive a tail-whip or two.seriously (be honest) do NE of you fold your scooter? No? exactly.it doesnt matter what scooter you buy,whether it be an Razor A,2,3,Pro Mod,JD Bug,Mirco Sprite,Bullet,Monster Bullet,whatever.if you dont lock the folding mech on them,theyll just fuck up and jiggle fowards and backwards.i know that people (little kids) like to fold their scooters (also theyd have to have triangular boxes to fit them in), but they could have atleast gave us 3 bolts and heads to lock it ourselves,then everyone would be happy!!!

what i wondered is that as far as i know Ricky Warnicke was the first one to test out the pro mod,he should of said that the jiggleing is becoming a big problem.Pro mod my ass,(oops,i apoligise) if it was pro,it wouldnt keep messing around with the jiggleing.Quip-step arent even a well- known company for scooters,and youll all probably say "hold on now,the pro model is way better than quick-steps,but with quick-steps,you dont need to lock the folding mech,because it doesnt jiggle around all the time,it has something on the folding mech that tightenes it so it doesnt jiggle,if the folding mech on the micro doesnt have holes in it then you either have to drill some holes on the folding mech,and do the "original 3-bolt way" or weald it

(P.S. Sams scooter looks like the strongest scooter ive ever seen,why cant razor make them like that!!!)
Click to expand...

well said, if the pro model is supposed to be designed for us scooterers, y didnt they weld that mech shut
Click to expand...

thank you dude.I try make a fair arguement with it though.one of the biggest problems is packaging,if its not folded,it will have to be in a bigger box,and since an L-shaped box would cost too much to make, theyd all be triangular-shaped.also,lots of stupid kids moms will complain that the scooters dont fold anymore,theyll probably ask why this simple convinience has become so obsolite,thatll probably down there sales.and you never know,someday,somebody might make a scooter-fold trick ,i dunno,like a tail-grap in which you you fold the scooter,(making sure it doesnt lock into place),open it back up and riding away ,could call it like a "Book-Fold" or a "Fold-Air",could be possible,lol.another thing is you wouldnt be able to replace your handle-bars ,because theyd be no point in the handle-bars coming off because the scooter wouldnt fold,because the point of the handle-bars comin out is to put them in the mult-mount clip ,for easy portability.well....you get what i mean.
also,in razors RVM1,every1 carries their scooters normally,they dont fold them,also whats the point of folding in the first place,it doesnt make them weigh less,and dont forget the time it takes to fold and unfold them (cuz ya know....there a real bitch to fold,lol) some1 should put a poll asking "do you fold your scooter?" yes:0% no 100%,ya get me?

will some1 do that for me? ,never mind ill do it,lol.

Who's with me?!!!
Click to expand...


if they hav problems packing it y dont thy just sent all the parts in a box n u set it up urself? if its 4 ppl that scooter properly they will no how 2 do that...
 
You must log in or register to reply here.
Top