Loose Axels

[Wubblelvr]

haha

i find stock axels never loosen

wat deck, fork are u using?

Ya they never do loosen

 

[alexiorio]

I think I tightened my front axle to much because now it isnt wide enough to fit 110mm

What are you on?
Let me get some.

Really though, width has nothing to do with wheel size, all wheels have 24mm hubs.
Also, you can't over tighten a wheel with bearing spacers, and if you aren't using bearings spacers, you're retarded.

 

[Jon.]

true^

 

[Devin Catron]

I think I tightened my front axle to much because now it isnt wide enough to fit 110mm

What are you on?
Let me get some.

Really though, width has nothing to do with wheel size, all wheels have 24mm hubs.
Also, you can't over tighten a wheel with bearing spacers, and if you aren't using bearings spacers, you're retarded.

he means he bent the forks in

 

[Dylangnarxcore]

haha

i find stock axels never loosen

wat deck, fork are u using?

Razor Stock Fork, My Front and Rear Axels loosen

 

[alexiorio]

I think I tightened my front axle to much because now it isnt wide enough to fit 110mm

What are you on?
Let me get some.

Really though, width has nothing to do with wheel size, all wheels have 24mm hubs.
Also, you can't over tighten a wheel with bearing spacers, and if you aren't using bearings spacers, you're retarded.

he means he bent the forks in

Again, that wouldn't have happened with bearing spacers. But it's done now. Bend them back.
And don't tighten the shit out of your wheels. Tighten them just so they make no noise, no tighter.

Personally I use a grade 8 steel allen key head bolt for my back axle, and a stainless steel axle that came with my FrenchID forks for my front axle.

I don't have a problem with loose axles anyway, I constantly re-tighten everything on my scooter, at least once every 2 days.
And it's so worth it.


So my only advice is to check your axles constantly, don't use stock rear axles, and oil your bearings
Hope I helped.

 

[anticee23]

use thread lock its a spray that u spray on the threaded part then put it all back together and it wont get loose until u loosen it

 

[Spencer Steed]

pull a nate grant and dgaf

 

[Josh Herman]