Making your own forks

[crumbones]

Can someone run me through or make/show me a tutorial on how to make your own inward style forks?
thanks

 

[ayrton 420]

http://www.youtube.com/watch?v=Ds23puao7AI

 

[crumbones]

that doesnt tell me how to make them it just shows some

 

[Brian Boston]

If you have the knowledge of proper welding i would believe you would be smart enough to figure out how to design the fork, since your going to have to put it togeather...

 

[ayrton 420]

take a pro fork
cut the fork legs off
get a 1/4 peice of flat steel
drill a 1 1/8 hole in it
cut a rectangle 2 by 4 in around it
take 2 peices of 3/4 steel
cut them bowth to 3 in
make a 45 dagree cut at the bottom
drill a 5/16 hole at the bottom
get some washers and weld them at the bottom of the fork legs
weld the fork legs to the flat peice
weld in the fork tube
and walla you have a home made fork

 

[crumbones]

thanks ayrton, dont understand some of it but i'll get my dad to dumb it down for me