mgp nitro bars, nitro forks, SCS.

[salamiiscooter]

can i use mgp nitro bars, nitro theradless forks and a SCS compression and clamp?
i'm just curious cause i got scuicides with my mgp nitro order, and they are too small for the forks.
but i need to use my mgp nitro bars.
thanks in advance

 

[brody01134]

well yeah the suicids bars will work with all threadleaa forks using scs

 

[salamiiscooter]

but the nitro forks have weird arse compression..
and this is my first compression i have ever ran :\
so im just making careful desisions before i buy stuff, do i don't waste cash.

 

[alfie wisker]

nitro has hic.
just take the hic shim off the fork and use the scs with the phoenixs bars

 

[brody01134]

yeah take out the shim and use the topcap and bolt with scs.

 

[jakeishectik]

yes you need to cut the fork because it is extremly long

 

[KNOX LOCAL]

why can't madd make normal sized parts?

 

[salamiiscooter]

they made them bigger so it fits prett much all bars, forks and wheels :\

 

[Jacob Mahon]

just sayin, its not an SCS they use HIC, its an oversized clamp with oversized bars

 

[Sherry123]

MPG decks have a headtube that is about 1 inch shorter than most other decks. This means that currently available aftermarket parts such as forks and compression sets may not fit. It also means that the MGP bar is one inch higher than other bars. For example: a 23 inch MGP bar is the equivalent of a 22 inch bar on most scooters.

 

[Jacob Mahon]

on the nirto its 2 and a half intchs the old mgps are 2 intchs and a normal razor pro, ultra, tsi ect. is 3 intchs so reall you can use some parts but userly have to cut half an intch down i would recermend if u were going to get new forks and compression get apex forks for mgps and V2 SCS there really good has a bulit in star nut so you dont have to worry about pulling it out and you can titen it as much as you want and the SCS has more clamping power then most SCS's on the market and is about 100grams lighter and i think it looks so much nicer aha